Download presentation
Presentation is loading. Please wait.
1
<month year> doc.: IEEE /119 September, 2003 Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Technical Requirements for mmW WPAN ] Date Submitted: [ 14 September 2003] Source: [Yuichi Shiraki] Company [Oki Electric Industry Co., Ltd.] Address [3-4 Hikari-no-oka, Yokosuka, Kanagawa , Japan] Voice:[ ] Re : [] Abstract:[Introduction of Technical requirements for mm-Wave WPAN ] Purpose:[Contribution for millimeter-wave interest group ] Notice :This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release:The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P Yuichi Shiraki Oki Reed Fisher, Oki
2
Technical Requirements for millimeter-Wave WPAN
September, 2003 Technical Requirements for millimeter-Wave WPAN Yuichi Shiraki Oki
3
mmW WAPN System PHY Requirements (1)
<month year> doc.: IEEE /119 September, 2003 mmW WAPN System PHY Requirements (1) TG3a Alt-PHY Technical Requirements (IEEEP /371) mmW WPAN System 480Mbpsor more (range not specified) Several Bit Rate and Range Transmission EIRP Less than Regulatory emission level Less than Regulatory emission level Coexistence and Interference Resistance Coexistence with other 802, Bluetooth,etc Robustness in multipath (indoor) Coexistence with other 802 including TG3a Alt-PHY, Bluetooth,etc Coexistence among mmW System Robustness in multipath (indoor) Channel model Specified by IEEE P /368 To be specified with experimental investigations Yuichi Shiraki Oki Reed Fisher, Oki
4
mmW WAPN System PHY Requirements (2)
<month year> doc.: IEEE /119 September, 2003 mmW WAPN System PHY Requirements (2) TG3a Alt-PHY Technical Requirements (IEEEP /371) mmW WPAN System 100mW or 250mW or Power save function To be specified Power consumption Capable of fitting into a form factor consistent with a camera,PDA,etc Capable of fitting into a form factor consistent with a camera,PDA,etc Form factor Complexity Minimal to enable mass commercial adaptation for cost sensitive products Minimal to enable mass commercial adaptation for cost sensitive products Supplements to functionality Alt-PHY operate with the MAC without fundamental change in operation Alt-PHY operate with the MAC without fundamental change in operation (Supplements can be additions which expand the capability of system) Yuichi Shiraki Oki Reed Fisher, Oki
5
mmW WAPN System PHY Requirements (3)
<month year> doc.: IEEE /119 September, 2003 mmW WAPN System PHY Requirements (3) TG3a Alt-PHY Technical Requirements (IEEEP /371) mmW WPAN System Comply with necessary geopolitical or regional regulations Comply with necessary geopolitical or regional regulations Regulatory Other item directionality of antenna Assumption of Omni-directional antenna No exclusion of directional antenna if needed or if provided the method of the mitigation of user's troublesomeness. Yuichi Shiraki Oki Reed Fisher, Oki
6
Conclusion A trial example of technical requirements is introduced.
<month year> doc.: IEEE /119 September, 2003 Conclusion A trial example of technical requirements is introduced. More detail specifications will be introduced in the next mmWIG meetings Yuichi Shiraki Oki Reed Fisher, Oki
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.