1. Autostreeter Use the buttons to navigate the training package
First Page
Previous
Next
Last Page

2. Autostreeter
New feature in Maris. To use this program you must exit Maris, then…
Start
>Programs
>Edulog.nt Server Software
>Autostreeter

3. Autostreeter
Layers will display on top of one another in the order they were created!
Lets Practice Removing
and Creating Layers.
Press the Remove button.
Continue pressing it
Until all the layers are
Gone.

4. Now lets create our layers in a preferred order….
Autostreeter
Lastly, Select All Segments
Now lets create our layers in a preferred order….
To begin, Click Add
Type “All Segments”
Beside Name
Select Type Segment

5. Autostreeter
Typically, when finished adding all of our new layers, we select Extract and Build. This is done ONLY if you started with no Layers Or have made geocode changes. Otherwise, you select Build Only.
So, in our example choose….
Extract and Build

6. Autostreeter Now let’s create the rest of our layers in this order:
Layer Name Type Speed Segment Level
All Segments Segment All Segments
All Streets Street 1 – 60
County Line Street
Hazard Segment Hazard
No Travel Segment Direction > No Travel
One Way Segment Direction > One Way
Private Road Street
Rivers Street 97 – 97
RailRoads Street 99 – 99
Bridges Street 14 – 14
Military Base Street 96 – 96
Apartments Street 11 – 11
Mobile Home Parks Street 12 – 12
School Drive Street 13 – 13

7. Autostreeter
Since we earlier chose, Extract and Build, and we haven’t made any Geocode changes, this time we only need to select Build Only.
BTW: In EMU you can
create an AUTOSTREETER
batch that does the same as
Extract and Build!

8. Autostreeter
We’re done so select Exit, and return to Maris

9. Autostreeter Returning to Maris Select Yes at the prompt
When you re-enter Edulog.nt, you will see this confirmation
Message that lets you know that Autostreeter information has
Changed.
Select Yes at the prompt

10. Displaying Autostreeter Layers
Edulog.nt Tools > Load Autostreet Layers
Maris Tools > Load Autostreet Layers
Displays the control window for our layers
Once these layers are checked on, they come up automatically every time you enter Maris
Notice “labels” and collision detection!

11. Adding Autostreet Layers
When you re-enter Maris, you will see a message that lets you know that Autostreeter information has changed
Select Yes to the prompt

12. Autostreeter This concludes the training session.
Please do one of the following:
Go back and review areas that interest you.
Click Exit to leave the presentation.