1. Technological Process

2. STAGES

3. Identify the problem
Brainstorming: As much ideas as you can

4. Identify the problem
Rich Picture: All the ideas are linked

5. Come up with ideas to solve the problem
The design Problem
Short description of what happens
The problem is a paragraph or more in length.
The first sentence should state the problem, adding more detail with the following sentences.
Make some questions that will help you to understand the problem

6. Come up with ideas to solve the problem
The design Brief
Always start the design brief with “I am going to design and make .....” followed by a general description.
Do not be too specific.
Do not be specific about materials. Instead describe the materials to be used as strong, tough, flexible, water proof, etc.
Mention points such as; safety, general size, what it will do (it’s functions), general properties of the materials needed, who it is for.
Basic cost of manufacture or a lower and upper cost limits.
Circuit requirements and other points you feel are important.

7. Design a Solution
The Analysis: Make some questions that have to be answered
The Synthesis: It is when you give answers to those questions that were made in the Analysis. Usually you do not have all the answers until the researching is completed.
Planing the time chart. A Time Chart is a way of planning your project. It includes all the sections involved in research and development:

8. Carry out the Solution
Taking into account all the researching and conclusions you have to develop your proyect/idea.
Make a drawing. It should be precise and drawn to a scale.

9. Carry out the Solution
Manufacture. It is the process of making something, do it by following the development sheet

10. Evaluate the Solution
Designers evaluate their finished products or prototypes in order to test whether they work well and if the design can be corrected or improved.

11. Share the Results
Once the final solution has been tested, share the Results in order to make them public and known for customers.