1. PNEUMATIC CONVEYING SYSTEM WWW.SCORPIOBMH.COM

2. PNEUMATIC CONVEYING SYSTEM A PNEUMATIC CONVEYING SYSTEM IS A PROCESS BY WHICH BULK MATERIALS OF ALMOST ANY TYPE ARE TRANSFERRED OR INJECTED USING A GAS FLOW AS THE CONVEYING MEDIUM FROM ONE OR MORE SOURCES TO ONE OR MORE DESTINATIONS. PNEUMATIC BULK MATERIAL HANDLING EQUIPMENT DESIGNED TO TRANSPORT YOUR DRY BULK MATERIALS WITHIN YOUR PROCESS. PNEUMATIC CONVEYOR SYSTEMS INCLUDE AN AIR SOURCE, AN INFEED DEVICE, A CONVEYING LINE, A RECEIVER AND DUST FILTRATION. PNEUMATIC CONVEYORS ARE CHARACTERIZED BY PRESSURE OR VACUUM SYSTEMS AND USE EITHER A DILUTE PHASE OR DENSE PHASE TECHNOLOGY TO TRANSPORT MATERIAL

4. DENSE PHASE MODE OF CONVEYING : DENSE PHASE CONVEYING ON THE OTHER HAND IS A TOTALLY DIFFERENT CONCEPT AND IS NON- SUSPENSION FLOW. THE MATERIAL IS FILLED INSIDE A PRESSURE VESSEL, WHICH IS THEN PRESSURIZED WITH THE AIR OR GAS TO BE USED FOR CONVEYING. ONCE A PRE-SET PRESSURE IS REACHED INSIDE THE VESSEL, THE BOTTOM DISCHARGE VALVE CONNECTED TO THE CONVEYING PIPE OF THE SYSTEM AUTOMATICALLY OPENS AND THE MATERIAL IS “PUSHED” TO THE DESTINATION. HIGHER MATERIAL TO AIR LOADINGS ARE POSSIBLE IN DENSE PHASE CONVEYING BUT NOT ALL MATERIALS CAN BE CONVEYED IN THIS METHOD. THE METHOD USES COMPRESSED AIR AND NOT LOW-PRESSURE AIR AND REQUIRES AN AIR COMPRESSOR, AIR RECEIVER AND AIR DRYER

6. SPECIFICATIONS OF DENSE PHASE PNEUMATIC CONVEYING SYSTEM : CONVEYING MATERIAL: ALMOST ALL POWDERED MATERIAL CONVEYING CAPACITY : UPTO 150 TPH CONVEYING DISTANCE: UPTO 1000M (PLEASE CHECK WITH SEBMH FOR PARTICULAR APPLICATION) MOC: MS CONSTRUCTION / SS304 CONTACT PARTS PAINT: SYNTHETIC ENAMEL PAINT - 100DFT. (OPTIONAL: EPOXY PAINT) OFFER : COMPLETE PACKAGE WITH PLC/ SCADA, INSTALLATION AND COMMISSIONING

7. DILUTE PHASE MODE OF CONVEYING : DENSE PHASE CONVEYING ON THE OTHER HAND IS A TOTALLY DIFFERENT CONCEPT AND IS NON-SUSPENSION FLOW. THE MATERIAL IS FILLED INSIDE A PRESSURE VESSEL, WHICH IS THEN PRESSURIZED WITH THE AIR OR GAS TO BE U SED FOR CONVEYING. ONCE A PRE-SET PRESSURE IS REACHED INSIDE THE VESSEL, THE BOTTOM DISCHARGE VALVE CONNECTED TO THE CONVEYING PIPE OF THE SYSTEM AUTOMATICALLY OPENS AND THE MATERIAL IS “PUSHED” TO THE DESTINATION. HIGHER MATERIAL TO AIR LOADINGS ARE POSSIBLE IN DENSE PHASE CONVEYING BUT NOT ALL MATERIALS CAN BE CONVEYED IN THIS METHOD. THE METHOD USES COMPRESSED AIR AND NOT LOW-PRESSURE AIR AND REQUIRES AN AIR COMPRESSOR, AIR RECEIVER AND AIR DRYER (WHERE THE MATERIALS ARE HYGROSCOPIC). DENSE PHASE CONVEYING IS GENERALLY USED FOR HIGH TONNAGE AND LONG DISTANCE CONVEYING WITH THE ASSISTANCE OF AIR BOOSTERS (ABOVE 10 TPH AND MORE THAN 100M)

8. CONTACT US SCORPIO ENGINEERING BMH PVT. LTD. 'SCORPIO HOUSE' 132, WHEELER ROAD, COX TOWN BANGALORE 560 005, INDIA PHONE :+91 80 48518223 PHONE : +91 80 25487578 E-MAIL : INFO@SCORPIOBMH.COM WEBSITE : WWW.SCORPIOBMH.COM