1. Wireless Solutions Overview
June 12, 2017
Douglas Lighting Controls

2. Channel Notice
Product Specification (electrical and mechanical) is subject to change without notice. Information provided is directional only and does not constitute an offer of sale to the market.
Patent(s) Pending
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Panasonic is under license.

3. Outline
Douglas Lighting Controls Bluetooth® Fixture Controller & Sensor
Douglas Lighting Controls Bluetooth® Controller
Douglas Lighting Controls Bluetooth® Sensor
Douglas Lighting Controls Bluetooth® Switches
Douglas Lighting Controls Bluetooth® Dialog Gateway
Architecture

4. Douglas Lighting Controls Bluetooth® Fixture Controller & Sensor
Automated Fixture Control > For Parking Garages, Warehouses….
Upgrade existing or add to new fixtures
Meet Energy Code requirements
Reduce energy consumption
No light switches
Outdoor Rated!
1:1 or 1:Many fixture control
Limit of fixtures on one controller > dependant on total lighting load, voltage and total 0-10V current
Occupancy control (PIR) > 20A relay > ON/OFF control > Adjustable time OFF delay
Safety and energy savings
Daylighting controls (photo sensor) > 0-10V dimming
Optimize lighting and maximize energy savings
Bi-level Lighting
Fits common vapor tight fixtures by installing into ½” knock-out
No need for additional conduit/j-boxes/wiring to implement lighting controls
Deck Level Configuration
Bluetooth enabled iOS smartphone devices (or iPod Touch)
IP65 rated
Prevent water ingress in outdoor applications like parking garages
Relay load and 0-10V current sink to determine number of fixtures
800W 120VAC
1200W 277Vac standard ballast
277Vac electronic ballast
347Vac standard ballast
0-10V max. current sink (25mA) divided by the amount of current sourced by each fixture driver give you the max number of fixtures based on current sinking. The max. number of fixtures is the number of fixtures that are below the MAX for both calculations
e.g. 50W fixtures at 120VAC with 1mA current source on 0-10V
max number of fixtures based on watts = 800/50 = 16
max number of fixtures based on current sink = 25mA/1mA= 25
Max number of fixtures =16 –> lower of the 2 numbers
Note: This is a stand-alone system > it does not operate with other Douglas Lighting Controls Bluetooth devices (switches, sensors, controllers, gateways).

5. Specifications Part #: BT-FMS-A Functionality
Occupancy, CLC, Bi-level level light set point, time delay 10 min
Download Douglas Lighting Controls App from Apple App store for configuration
Outdoor Use – Rainproof when installed per instructions
For Installation with field-installed conductors of 60°C (140°F) minimum rating
See Installation Manual for complete details
Input Voltage
120/277/347Vac 60Hz
Occ. Sensor Range
Up to 40 feet
Load Ratings
120Vac standard ballast
277Vac standard ballast
277Vac electronic ballast
347Vac standard ballast
Dimming
25mA current sinking
Approvals
Certified to CAN/CSA Std. C22.2 No. 14
Conforms to UL508
Contains IC: 8254A-B1010SP0
Contains FCC ID: W7Z-B1010SP0
Warranty
Standard 1-year
Part #: BT-FMS-A
20 ft.
30 ft.
40 ft.

6. Douglas Lighting Controls Bluetooth® Fixture Controller & Sensor
Spacer
Spacer
Threaded chase nipple break point for overhangs less than ½” (12mm).
Fixture rail
Mounting
Use Spacer and full length threaded chase nipple for fixture rail overhang greater than ½” (12mm).
Wiring
Red – relay/load
Black – hot/line
White - neutral
Grey
Violet
0-10V dimming

7. Our Bluetooth® Wireless Mesh Architecture

8. Douglas Lighting Controls Bluetooth® Controller
Converts fixtures into wirelessly controlled luminaires
Upgrade existing or add to new fixtures
Meet Energy Code requirements
Reduce Energy Consumption
Eliminates the need for control wires between fixtures
Makes design and installation easier
1:1 or 1:Many fixture control
Limit of fixtures on one controller > dependant on total lighting load, voltage and total 0-10V current
Functionality
Powered by Fixture
20A relay for ON/OFF control
0-10V dimming (Daylight Harvesting when Douglas Lighting Controls Bluetooth Sensor added)
Deck level commissioning using iOS smartphone App
Communicates with other Douglas Lighting Controls Bluetooth enabled system devices (occupancy sensors, gateways, and wall station switches)
Easily installed using the ½” chase nipple and the included flying leads
Red – Load Control
White – Neutral
Black – Hot
Grey & Violet – 0-10V dimming
Relay load and 0-10V current sink to determine number of fixtures
800W 120VAC
1200W 277Vac standard ballast
277Vac electronic ballast
347Vac standard ballast
0-10V max. current sink (100mA) divided by the amount of current sourced by each fixture driver give you the max number of fixtures based on current sinking. The max. number of fixtures is the number of fixtures that are below the MAX for both calculations
e.g. 50W fixtures at 120VAC with 1mA current source on 0-10V
max number of fixtures based on watts = 800/50 = 16
max number of fixtures based on current sink = 25mA/1mA= 25
Max number of fixtures =16 –> lower of the 2 numbers

9. Dimensions & Specs Part #: BT-PP20-A Input Voltage 120/277/347VAC 60Hz
Output
12VDC, 30mA
Load Ratings
120Vac standard ballast
277Vac standard ballast
277Vac electronic ballast
347Vac standard ballast
Dimming
100mA current sinking
Approvals
Certified to CAN/CSA Std. C22.2 No. 14
Conforms to UL 508 Standard
FCC Class A
Class 2 Power Supply UL1310
Plenum Rated UL2043
ASHRAE Compliant
California Energy Commission Title 24 & NYLL48 Compliant
Contains IC: 8254A-B1010SP0
Contains FCC ID: W7Z-B1010SP0
Environment
Indoor, stationary, non-vibrating, non-corrosive atmosphere and non-condensing humidity
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: 14° to 140°F (-25° to 60°C)
Warranty
Standard 1-year
12VDC output
for
BT-WOR-A
LED Status Indicator
Factory Reset
Part #: BT-PP20-A

10. Installation
and relay load limits.

11. Douglas Lighting Controls Bluetooth® Sensor
Occupancy and Daylight Sensing
Meet Energy Code requirements
Reduce Energy Consumption
Functionality
Powered by Douglas Lighting Controls Bluetooth Controller
Occupancy Sensor for occupancy or vacancy control
Daylight Sensor for Natural Daylight Harvesting
Small form factor (1” lens diameter)
LED indicator within lens
Deck level configuration using iOS Smartphone App
Innovative tool-less mounting
One per Controller
Part #: BT-WOR-A

12. Dimensions
Fits into a 15/16” hole
29/32”
37/8”
11/4”
Part #: BT-WOR-A

13. Installation Retention Flange Fits into a 15/16” hole
Cutting head for quick installation into soft ceiling tiles
Rubber Friction-Fit Ribs
12VDC Output
Screwless Terminal Block
Douglas Lighting Controls
Bluetooth Controller
Part # BT-PP20-A
#20AWG (20/2)
~50” length

15. Douglas Lighting Controls Bluetooth® Switches
Wireless Control Switches
To control fixtures using Douglas Lighting Controls Bluetooth Controller
0-10V Dimmer & 1-button Switch
4-button Switch
8-button Switch
Power by line voltage (120/277VAC & 347VAC models)
Field commission via Smartphone App
Face plates sold separately

16. Dimensions & Specifications
347VAC
Power
Line Voltage: 120/277VAC or 347VAC (device dependent)
Frequency: 60Hz
Operating Environment
Indoor, stationary, non-vibrating, non-corrosive atmosphere and non-condensing humidity
Operating Temperature
32°F to 104°F (0 to 40°C)
Storage Temperature
-14°F to 140°F (-25° to 60°C)
Approvals
Certified to CAN/CSA Std. C22.2 No. 14
Conforms to UL 508 Standard
FCC Class A
ASHRAE Compliant
California Energy Commission Title 24 & NYLL 48 Compliant
120/277VAC
Part #: 120/277VAC 347VAC
BT-DMSW-U-A BT-DMSW-3-A
BT-4BTSW-U-A BT-4BTSW-3-A
BT-8BTSW-U-A BT-8BTSW-3-A

17. Installation
For Installation with field-installed conductors of 60°C (140°F) minimum rating
Mounts directly into a standard listed single gang wall station box
Install device into position
Connect wires as shown on diagram (14AWG)
Download free Smartphone Commissioning App
Use Commissioning App to configure system

18. Douglas Lighting Controls Bluetooth® Dialog® Gateway
Sending and receiving Bluetooth commands into the Dialog (WLC-3150) network
It is easily installed onto a wall or ceiling or behind a wall or ceiling tile (not behind metal)
Dialog 18/2 power and data network
Converts Bluetooth commands into Dialog protocol
Easily installed using mounting holes and screws
Dialog connector plug included
Plug ‘N Control®
4 Rooms per gateway
A room has 2 major addresses each with 4 minor addresses
Part #: BT-DLC-A
LED Status Indicator & Reset
Dialog Network Plug-in

20. Commissioning / User App
Wireless Mesh Architecture
Sensor
Controller
Power to Sensor
Commissioning / User App
Switches

21. Wireless Mesh Architecture to Dialog Central Controller
Sensor
Controller
Gateway
Dialog Central Controller
Commissioning / User App
Switches

22. Website

23. Materials