Presentation is loading. Please wait.

Presentation is loading. Please wait.

Professor Andrea Goldsmith

Similar presentations


Presentation on theme: "Professor Andrea Goldsmith"— Presentation transcript:

1 Professor Andrea Goldsmith
EE 179: Introduction to Communications Professor Andrea Goldsmith Stanford University USA

2 Outline Course Info and background Course Syllabus
Wireless History and Trends Wireless Vision for the Future Technical Challenges Current Wireless Systems Emerging Wireless Systems Spectrum Regulation Standardization

3 Wireless (Pre-)History
”Pre-historic” times: smoke signals, bonfires, lighthouses, torches 1895: first radio transmission (Marconi, Isle of Wight, 18 mile distance) 1915: Wireless voice transmission established between San Francisco and New York 1945: Arthur C. Clarke(sci-fi writer) suggests geostationary satellites 1946: Public mobile telephony introduced in 25 US cities 1947: Invention of cellular concept (AT&T) 1957: First deployed communication satellite (Sputnik, Soviet Union) 1963: First deployed geostationary satellite (NASA) 1971: First packet-based radio network (ALOHANET, Univ. of Hawaii) 1983: First analog cellular system deployed (Chicago) 1985: Unlicensed frequency bands first authorized for WLAN use Ca. 1990: First digital cellular systems (”2G”) now: Standardization of 3rd generation mobile communication systems, WLANs, WPANs, sensor network radios,...

4 Wireless History, cont’d
First Mobile Radio Telephone 1924

5 Pre-Cellular Wireless
One highly-elevated, high-powered antenna in a large service area Small number of channels (few users) Analog transmission, inefficient use of spectrum (no frequency reuse) Very low capacity, power-inefficient

6 Cellular Systems: Re-use channels to maximize capacity
Geographic regions are divided into cells Frequencies/timeslots/codes reused at spatially separated locations. NB: Co-channel interference (between same-color cells below). Base stations/MTSOs (Mobile Telephone Switching Offices) coordinate handoff and control functions Shrinking cell size increases capacity - but also networking burden.. BASE STATION MTSO

7 Cellular Phone Networks
San Francisco PSTN: Public Service Telephone Network BS BS Internet New York MTSO MTSO PSTN BS

8 The Wireless Revolution
Cellular is the fastest growing sector of communication industry (exponential growth since 1982, with over 2 billion users worldwide today) Modern-day “generations” of wireless (pre-cellular: 0G): First Generation (1G - ex. NMT, ca ): Analog 25 or 30 KHz FM, voice only, mostly vehicular communications. Second Generation (2G - ex. GSM, ca ): Narrowband TDMA and CDMA, voice and low bit-rate data, portable units. 2.5G G: Enhancements to 2G network for increased data transmission capabilities (ex. GPRS + EDGE, ca ). Third Generation (3G - UMTS/IMT-2000, ca ): Wideband TDMA and CDMA, voice and high bit-rate data, portable units 4th Generation (4G/B3G, ca ?): ???... Heterogeneous network of several interacting systems/networks, not one dedicated network; diverse, advanced, adaptive air interfaces, protocols, and resource allocation mechanisms; multitude of services including high-capacity multimedia)

9 Exciting Developments
Internet and laptop use exploding Wireless LANs and PANs growing rapidly Huge cell phone popularity worldwide Emerging systems such as Bluetooth, UWB, Zigbee, and WiMAX opening new doors Military and security wireless needs Important interdisciplinary applications Sensor networks

10 Future Wireless Networks (The Wireless Vision)
Ubiquitous Communication Among People and Devices Wireless Internet access Nth generation Cellular Wireless Ad Hoc Networks Sensor Networks Wireless Entertainment Smart Homes/Spaces Automated Highways All this and more… Hard Delay Constraints Hard Energy Constraints

11 Design Challenges The wireless channel is a difficult and capacity-limited broadcast communications medium! Traffic patterns, user locations, and network conditions are constantly changing... Traffic is nonstationary, both in space and in time Energy and delay constraints change design principles across all layers of the protocol stack (points towards cross-layer design)

12 Evolution of Current Systems
Wireless systems today 2G + 2.5G Cellular: ~30-70 Kb/s. WLANs: ~10 Mb/s. Next Generation 2.75G + 3G Cellular: ~300 Kb/s. WLANs: ~70 Mb/s. Technology Enhancements Hardware: Better batteries. Better circuits/processors. Co-optimization with transmission schemes. Link: Antennas, modulation, coding, adaptivity, DSP, BW. Network: Dynamic resource allocation. Mobility support.

13 3G: ITU-developed, UMTS/IMT-2000
Satellite Macrocell Microcell Urban In-Building Picocell Global Suburban Basic Terminal PDA Terminal Audio/Visual Terminal

14 Future Generations Still: Fundamental Design Breakthroughs Needed
Other Tradeoffs: Rate vs. Coverage Rate vs. Delay Rate vs. Cost Rate vs. Energy Rate 4G 802.11b WLAN 3G 2G -Diminishing returns by beating on the same areas for optimization -Other network tradeoffs not even considered -Fundamental breakthroughs both in the way wireless networks are designed and in the design tradeoffs that are considered. 2G Cellular Mobility Still: Fundamental Design Breakthroughs Needed

15 Current Wireless Systems
Cellular Systems Wireless LANs (802.11a/b/g, Wi-Fi) Satellite Systems Paging Systems Bluetooth Ultrawideband radios (UWB) Zigbee/ radios WiMAX (802.16)

16 Wireless Local Area Networks (WLANs)
1011 0101 Internet Access Point WLANs connect “local” computers (~100 m range) Breaks data into packets Channel access is shared (random access) Backbone Internet provides best-effort service Poor performance in some app’s (e.g. video)

17 Wireless LAN Standards (Wi-Fi)
802.11b (Current Generation) Standard for 2.4GHz ISM band (bw 80 MHz) Frequency hopped spread spectrum Mbps, 500 ft range 802.11a (Emerging Generation) Standard for 5GHz NII band (bw 300 MHz) OFDM with time division 20-70 Mbps, variable range Similar to HiperLAN in Europe 802.11g (New Standard) Standard in both 2.4 GHz and 5 GHz bands OFDM (multicarrier modulation) Speeds up to 54 Mbps In future all WLAN cards will have all 3 standards...

18 Satellite Systems Cover very large areas Different orbit heights
GEOs (39000 Km) via MEOs to LEOs (2000 Km) Trade-off between coverage, rate, and power budget! Optimized for one-way transmission: Radio (e.g. DAB) and movie (SatTV) broadcasting Most two-way systems struggling or bankrupt... (Too) expensive alternative to terrestrial systems (But: a few ambitious systems on the horizon)

19 Paging Systems (Personsøk)
Broad coverage for (very) short messaging Message broadcast from all base stations Simple terminals Optimized for 1-way transmission Answer-back is hard Overtaken by cellular

20 Bluetooth “Cable replacement” RF technology (low cost)
Short range (10 m, extendable to 100 m) 2.4 GHz ISM band (crowded!) 1 Data (700 Kbps) + 3 voice channels Widely supported by telecommunications, PC, and consumer electronics companies Few applications beyond cable replacement! 8C Cimini-7/98

21 UltraWideband Radio (UWB)
Impulse radio: sends pulses of tens of picoseconds (10-12) to nanoseconds (10-9) - duty cycle of only a fraction of a percent Uses a lot of bandwidth (order of GHz) Low probability of detection by others + beneficial interference properties: low transmit power (density) spread over wide bandwidth This also results in short range. But : Excellent positioning (ranging) capability + potential of high data rates Multipath highly resolvable: both good and bad Can use e.g. OFDM or equalization to get around multipath problem.

22 Why is UWB interesting? Unique Location and Positioning properties
1 cm accuracy possible Low Power CMOS transmitters 100 times lower than Bluetooth for same range/data rate Very high data rates possible (although low spectral efficiency) Mbps at ~10 feet range under current regulations 7.5 Ghz of “free spectrum” in the U.S. FCC (Federal Communications Commission) recently legalized UWB for commercial use in the US Spectrum allocation overlays existing users, but allowed power level is very low, to minimize interference “Moore’s Law Radio” Data rate scales with the shorter pulse widths made possible with ever faster CMOS circuits

23 IEEE /ZigBee radios Low-Rate WPAN (Wireless Personal Area Network) - for communications < 30 meters. Data rates of 20, 40, 250 kbps Star topology or peer-to-peer operation, up to 255 devices/nodes per network Support for low-latency devices CSMA-CA (carrier sense multiple access with collision avoidance) channel access Very low power consumption: targets sensor networks (battery-driven nodes, lifetime maximization) Frequency of operation in ISM bands

24 WiMAX: Worldwide Interoperability for Microwave Access
Standards-based (PHY layer: IEEE Wireless MAN family/ETSI HiperMAN) technology, enabling delivery of ”last mile” (outdoor) wireless broadband access, as an alternative to cable and DSL (MAN = Metropolitan Area Network). Several bands possible. OFDM-based adaptive modulation, 256 subchannels. TDM(A)-based. Antenna diversity/MIMO capability. Advanced coding + HARQ. Fixed, nomadic, portable, and mobile wireless broadband connectivity without the need for direct line-of-sight (LOS) to base station. In a typical cell radius deployment of 3 to 10 kms, expected to deliver capacities of up to 40 Mbps per channel, for fixed and portable access. Mobile network deployments are expected to provide up to 15 Mbps of capacity within a typical cell radius deployment of up to 3 kms. WiMAX technology already has been incorporated in some notebook computers and PDAs. Potentially important part of 4G?

25 Data rate 100 Mbit/sec UWB 802.11g 802.11a 802.11b 10 Mbit/sec
Bluetooth 100 kbits/sec ZigBee ZigBee 10 kbits/sec UWB 0 GHz 1GHz 2 GHz 3 GHz 4 GHz 5 GHz 6 GHz Frequencies occupied

26 Range 10 km 3G 1 km 100 m 802.11b,g 802.11a Bluetooth 10 m ZigBee
UWB 1 m UWB 0 GHz 1GHz 2 GHz 3 GHz 4 GHz 5 GHz 6 GHz

27 Power Dissipation 10 W 802.11a 3G 802.11bg 1 W 100 mW Bluetooth UWB
ZigBee 10 mW ZigBee UWB 1 mW 0 GHz 1GHz 2 GHz 3 GHz 4 GHz 5 GHz 6 GHz

28 Emerging Systems Ad hoc wireless networks Sensor networks
Distributed control networks

29 Ad-Hoc Networks Peer-to-peer communications.
No backbone infrastructure (no base stations). I.e. “Truly wireless”! Routing can be multihop. Topology is dynamic in time; networks self-organize. No centralized cooordination. Fully connected, even with different link SINRs (signal-to-interference plus noise ratios) -No backbone: nodes must self-configure into a network. -In principle all nodes can communicate with all other nodes, but multihop routing can reduce the interference associated with direct transmission. -Topology dynamic since nodes move around and link characteristics change. -Applications: appliances and entertainment units in the home, community networks that bypass the Internet. Military networks for robust flexible easily-deployed network (every soldier is a node).

30 Design Issues Ad-hoc networks provide a flexible network infrastructure for many emerging applications. The capacity of such networks is however yet generally unknown (hot research topic). Transmission, access, and routing strategies for ad-hoc networks are generally also still ad-hoc... Cross-layer design critical and very challenging. Energy constraints impose interesting design tradeoffs for communication and networking (nodes typically battery-driven).

31 Sensor Networks Energy is the driving constraint
Nodes typically powered by nonrechargeable batteries. Data (sensor measurements) flow to one centralized location (sink node, data fusion center). Low per-node rates - but up to 100,000 nodes. Sensor data highly correlated in time and space. Nodes can cooperate in transmission, reception, compression, and signal processing.

32 Energy-Constrained Nodes
Each node can only send a finite number of bits. Transmit energy minimized by maximizing bit time Circuit energy consumption increases with bit time Introduces a delay versus energy tradeoff for each bit! Short-range networks must consider transmit, circuit, and processing energy - jointly. Most sophisticated transmission techniques not necessarily most energy-efficient! Sleep modes save energy - but complicate networking. Changes everything about the network design: Bit allocation must be optimized across all protocols. Delay vs. throughput vs. node/network lifetime tradeoffs. Optimization of node cooperation. All the sophisticated high-performance communication techniques developed since WW2 may need to be thrown out the window. By cooperating, nodes can save energy

33 Spectrum Regulation Spectrum is a limited natural resource used by many. The worldwide radio spectrum is controlled by ITU-R (International Telecommunications Union) In Europe, by ETSI (European Telecommunications Standardization Institute). In the US, by FCC (Federal Communications Commission; commercial) and OSM (Office of Spectral Management; defense). In Norway, by Post- og teletilsynet (PT). Spectrum can be auctioned, paid fixed price for, or “given away” (unlicensed bands). Some spectrum typically set aside for universal use. Regulation, although necessary, can also stunt innovation, cause economic disasters, and delay system rollout... (cf. UMTS spectrum auctions in Europe)

34 Standards Interacting systems require standardization (compatibility, interoperability) Typically: Companies want their own systems adopted as standard! Alternatively: try for “de-facto” standards Worldwide standards determined by ITU-T (International Telecommunications Union) In Europe, by ETSI (European Telecommunications Standardization Institute) In the US by TIA (Telecommunications Industry Association) IEEE standards often adopted (also worldwide) Process fraught with inefficiencies and interest conflicts... Standards for current systems are summarized in Appendix D in the textbook.

35 Main Points The wireless vision for the future encompasses many exciting systems and applications Technical challenges transcend across all layers of the system design. Cross-layer design is emerging as a key theme in wireless. Existing and emerging systems provide excellent quality for certain applications, but poor interoperability. Standards and spectral allocation heavily impact the evolution of wireless technology. This course will however focus on basic technology issues related to and relevant for current and upcoming wireless systems.


Download ppt "Professor Andrea Goldsmith"

Similar presentations


Ads by Google