1. Model Editing (Continued)
Copy & Paste
Copy & Paste Special (Transformation)
Copy & Paste Special (Rotation)
Scale Model
Fill Pattern
Curve Pattern
Table Pattern
Reference Pattern

2. Copy & Paste
Copy & Paste: Click on the object you want to copy -> Click on Copy -> Click on Paste -> Placement -> Edit -> Select the place (e.g. “Upper Surface”) -> Sketch -> move the curser to the place you want to paste ->Done

3. Copy & Paste Special (Transformation)
Copy & Paste Special: Click on the object you want to copy -> Click on Copy -> Click on Paste Special -> Check Move/Rotate transformations to copies -> OK -> Click on Transformations -> Select a edge -> Using mouse drag to determine the position of the object or give the dimension for the distance to the original one
Transformation in 2nd direction: Click on Transformations -> select New Move -> select the 2nd edge -> Using mouse drag to determine the position of the object or give the dimension for the distance to the original one

4. Copy & Paste Special (Rotate)
Copy & Paste Special: Click on the object you want to copy -> Click on Copy -> Click on Paste Special -> Check Move/Rotate transformations to copies -> OK -> Click on Rotate-> Select a rotating axis -> Using mouse drag to determine the position of the object -> give angle between the copy and the original one. the dimension for the distance to the original one

5. Scale Model Scale Model: Click on the object you want to scale
-> Edit -> Scale Model -> Enter the scale -> Done
-> Yes

6. Fill Pattern
Fill Pattern: Click on the object you want to copy -> Click on Pattern -> Select fill -> Click on reference
-> define -> Select the plane to sketch -> sketch -> draw the closed the area ->Done

7. Curve Pattern
Fill Pattern: Click on the object you want to copy -> Click on Pattern -> Select Curve -> Click on reference
-> define -> Select the plane to sketch -> sketch -> draw the curve ->Done
Note: the start point needs to be determined

8. Table Pattern
Fill Pattern: Click on the object you want to copy -> Click on Pattern -> Select Table -> Select the dimensions about the object -> Create the table
-> Save -> Exit (Don’t use Quit)

9. Reference Pattern
Reference Pattern: Click on the object you want to copy -> Click on Pattern -> Select Reference -> Done