1. XC-RF850-FCW Wiegand Demo
XC-RF850 FCW with data cable
Invengo RFID Demo App v or later
Wiegand Controller
Wiegand Controller Software
Wiegand Controller Help
12V Power Supply (I used MW97/A-27253)

2. Links from the previous slide just in case
Application and software/RFID-Demo-ver rar

3. XC-RF850-FCW Wiegand Demo
Wiring

4. Configureing the Invengo RFID Demo App

5. XC-1003 – reading tags

6. Slow down the read rate using “Repeatedly acquire tag data filter time period” and configuring Session to “S1” and Target to “A”.

7. Enable Wiegand, configure the Port, Mode, Antenna and Pointer can click on [Configure].

8. Access Control Software
Download and unzip MJ_all_en.rar
Double click on AccessControlV7.83en/setup.exe to install the software
Go to C:\AccessControl and click on N3000.exe to run the app
User Name: abc
Password: 123

9. Access Control Software
Click on “1. Add Controllers By Searching”
When the controller is found (in blue) click on [Add Found To Database]
Once it is added, click on [Close]

10. Access Control Software
Click on [Operation], click on the icon representing the door (m001-1) then click on Monitoring to begin looking for tag reads.

11. Start Scanning
Click on [Scan] to start reading. Present a tag to the reader.

12. Success!
Tag reads should appear in the box in yellow.