1. Chapter 2: Application layer
2.1 Principles of network applications
2.2 Web and HTTP
Internet gaming
2.3 FTP
2.4 Electronic Mail
SMTP, POP3, IMAP
2.5 DNS
2.6 P2P file sharing
VOIP
2.8 Socket programming with TCP
2.9 Socket programming with UDP
2.10 Building a Web server
2: Application Layer

2. Definition
also called IP Telephony, Internet telephony, Broadband telephony, Broadband Phone and Voice over Broadband
the routing of voice conversations over the Internet or through any other IP-based network
Cisco IP Phone 7941G
2: Application Layer

3. Big Picture Modes of operation:
PC to PC
PC to phone
Phone to PC
Phone to Phone
Traffic go through Packet Switched Network instead of Public Switched Telephone Network (PSTN)
From Wikipedia, the free encyclopedia
2: Application Layer

4. Challenges Quality of Service (QoS) Need Internet connection
Internet provides best of service
No guarantee for latency, jitter…
Need Internet connection
Home broadband is not reliable
Power issue
VOIP phone, Cable Modem/DSL, Computer
Primary reason for not using VOIP for emergency calls
Second reason is location identification is hard for VOIP
2: Application Layer

5. Challenges Security Integration into global telephone number system
Most unencrypted
VOIP spam challenges
Integration into global telephone number system
Emergency call availability & functionality
Power, Internet connection
Call routing, location service
2: Application Layer

6. QoS Deal with Jitter Bandwidth Smoothed by playback buffer
Will cause more delay in playback
Too much delayed packets will be discard (dropped)
Bandwidth
64 kbps or less
Depends on codec and use of silence suppression
2: Application Layer

7. Chapter 2: Application layer
2.1 Principles of network applications
2.2 Web and HTTP
Internet gaming
2.3 FTP
2.4 Electronic Mail
SMTP, POP3, IMAP
2.5 DNS
2.6 P2P file sharing
VOIP
2.7 Socket programming with TCP
2.8 Socket programming with UDP
2: Application Layer

8. Socket programming
Goal: learn how to build client/server application that communicate using sockets
Socket API
introduced in BSD4.1 UNIX, 1981
explicitly created, used, released by apps
client/server paradigm
two types of transport service via socket API:
unreliable datagram (UDP)
reliable, byte stream-oriented (TCP)
2: Application Layer

9. Socket-programming using TCP
Socket: an interface between application process and end-end-transport protocol (UCP or TCP)
Why socket?: A Layer seen by application, OS transparent
controlled by
application
developer
process
TCP with
buffers,
variables
socket
process
TCP with
buffers,
variables
socket
controlled by
operating
system
internet
host or
server
host or
server
2: Application Layer

10. Socket programming with TCP
Client must contact server
server process must first be running
server must have created socket (door) that accepts client’s contact
Client contacts server by:
creating client-local TCP socket
specifying IP address, port number of server process
When client creates socket: client TCP establishes connection to server TCP
When contacted by client, server TCP creates new socket for server process to communicate with client
allows server to talk with multiple clients
source port numbers used to distinguish clients (more in Chap 3)
TCP provides reliable, in-order
transfer of bytes (“pipe”)
between client and server
application viewpoint
2: Application Layer

11. Many Versions of Socket APIs
Unix socket (berkeley socket)
Winsock
MacTCP ….
We introduce Unix socket API here
Can program under SUN OS, Linux, etc
A good tutorial on socket programming:
2: Application Layer

12. Socket Descriptor Data Structure
Descriptor Table
Family: AF_INET
Service: SOCK_STREAM
Local IP:
Remote IP:
Local Port: 2249
Remote Port: 3726 1 2 3 4
2: Application Layer

13. TCP Client/Server Socket Overview
TCP Server
socket()
TCP Client
bind()
socket()
listen()
bind()
accept()
connection establishment
connect()
data request
recv()
send()
data reply
send()
recv()
end-of-file notification
recv()
close()
close()
2: Application Layer

14. C Programming Header Files
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <netdb.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <unistd.h>
Enough for our socket programming in our Unix server, maybe not enough for other computers
2: Application Layer

15. What is a Socket? socket returns an integer (socket descriptor)
int sockfd; /* socket descriptor */
if ((sockfd = socket(AF_INET, SOCK_STREAM, 0)) < 0) }
perror(“socket”); exit(1); }
socket returns an integer (socket descriptor)
sockfd < 0 indicates that an error occurred
socket descriptors are similar to file descriptors
FILE *fid; fid=fopen(“test.txt”, “rt”);
AF_INET: associates a socket with the Internet protocol family
SOCK_STREAM: selects the TCP protocol
SOCK_DGRAM: selects the UDP protocol
2: Application Layer

16. Socket Structure (Client)
AF_INET
struct sockaddr_in {
short int sin_family; // Address family
unsigned short int sin_port; // Port number
struct in_addr sin_addr; // Internet address
unsigned char sin_zero[8]; // all zero };
// Internet address (Network Byte Order)
// (a structure for historical reasons)
struct in_addr {
unsigned long s_addr;
// that's a 32-bit long, or 4 bytes };
IP: 1A.2D.3C.4B
100
101
102
103 … … 1A 3C 4B 2D
Big-Endian (Network Byte Order)
2: Application Layer

17. Bind (Client) int sockfd; struct sockaddr_in local_addr;
local_addr.sin_family = AF_INET;
local_addr.sin_port = 0; // random assign a port
local_addr.sin_addr.s_addr = INADDR_ANY; // use my IP address
memset(&(local_addr.sin_zero), '\0', 8); // zero the rest of the struct
sockfd = socket(AF_INET, SOCK_STREAM, 0); // create an empty socket
bind(sockfd, (struct sockaddr *)&local_addr, sizeof(struct sockaddr));
Local
host
info
2: Application Layer

18. Remote Host Structure struct hostent {
feather.cs.ucf.edu
struct hostent {
char *h_name; /* official name */
char **h_aliases; /* alias list */
int h_addrtype; /* address type */
int h_length; /* address length */
char **h_addr_list; /* address list */ };
#define h_addr h_addr_list[0] /* backward compatibility */
struct hostent *hp;
hp = gethostbyname(“
“ ”
struct sockaddr_in remote_addr;
remote_addr.sin_family = AF_INET;
remote_addr.sin_port = htons(80); // short, network byte order (big-endian)
remote_addr.sin_addr = *((struct in_addr *)hp->h_addr);
memset(&(remote_addr.sin_zero), '\0', 8); // zero the rest
Remote
host
info
2: Application Layer

19. Connect(), send(), recv() by Client
connect(sockfd, (struct sockaddr *)&remote_addr, sizeof(struct sockaddr);
Local host
socket
Remote host
info
Struct sockaddr  sockaddr_in
After connecting to the remote sever….
Blocking call
char sendStr[100], recvStr[100]; ….
numByteSend=send(sockfd, sendStr, sendByteNum), 0); …
recvNumByte = recv(sockfd, recvStr, MaxDataSize, 0);
close(sockfd);
2: Application Layer

20. Partial Send() and recv()
Due to multiple packets in transmission
#include <sys/types.h>
#include <sys/socket.h>
int sendall(int sockfd, char *buf, int *len) {
int total = 0; // how many bytes we've sent
int bytesleft = *len; // how many we have left to send
int n;
while(total < *len) {
n = send(sockfd, buf+total, bytesleft, 0);
if (n == -1) { break; }
total += n; bytesleft -= n; }
*len = total; // return number actually sent here
return n==-1?-1:0; // return -1 on failure, 0 on success
2: Application Layer

21. Socket Programming in Server
Still need to initialize local_addr struct (page 17)
No need to initialize remote_addr struct (page 18)
No need to connect() a remote host
Instead, need to listen() on specified port (server port)
Accept() a connection request
Generate a new socket for one connection
Support multiple connections
2: Application Layer

22. int sockfd, new_fd; struct sockaddr_in local_addr, remote_addr;
assign local_addr (see Page 17. Use hton() to assign server port!)
socket(…); // create empty socket descriptor
bind(…); //fill in local address and assigned port to the socket descriptor
listen(sockfd, backLog); // backLog is the max no. of connections in queue
new_fd = accept(sockfd, (struct sockaddr *)&remote_addr,
&sizeof(struct sockaddr_in))
New socket discriptor
Following commun. through this
char sendStr[100], recvStr[100]; ….
recvNumByte = recv(new_fd, recvStr, MaxDataSize, 0);
…..
numByteSend=send(new_fd, sendStr, sendByteNum), 0); …
close(new_fd);
close(sockfd);
2: Application Layer

23. Socket Programming in Server: fork() for multi-connection service
while(1) { // main accept() loop
sin_size = sizeof(struct sockaddr_in);
new_fd = accept(sockfd, (struct sockaddr *)&remote_addr, &sin_size);
printf("server: got connection from %s\n", inet_ntoa(remote_addr.sin_addr));
if (!fork()) { // this is the child process (fork() returns 0 in child process)
close(sockfd); // child doesn't need the listener
send(new_fd, "Hello, world!\n", 14, 0); ………
close(new_fd); exit(0); }
close(new_fd); // parent doesn't need this
………….
parent
child
parent
2: Application Layer

24. Fork()
Tuotrial on fork():
System call fork() is used to create child process. It returns a process ID. After a new child process is created, both processes will execute the next instruction following the fork() system call.
On success:
PID of the child process is returned in the parent's thread of execution
0 is returned in the child's thread of execution
2: Application Layer

25. Chapter 2: Application layer
2.1 Principles of network applications
2.2 Web and HTTP
2.3 FTP
2.4 Electronic Mail
SMTP, POP3, IMAP
2.5 DNS
2.6 P2P file sharing
2.7 VOIP
2.8 Socket programming with TCP
2.9 Socket programming with UDP
2.10 Building a Web server
2: Application Layer

26. Socket programming with UDP
UDP: no “connection” between client and server
no handshaking
sender explicitly attaches IP address and port of destination to each packet
server must extract IP address, port of sender from received packet
UDP: transmitted data may be received out of order, or lost
application viewpoint
UDP provides unreliable transfer
of groups of bytes (“datagrams”)
between client and server
2: Application Layer

27. UDP Socket Programming
sockfd = socket(AF_INET, SOCK_DGRAM, 0)
No connect(), accept()
Send()  sendto(), recv()  recvfrom()
Sendto() includes target address/port
SOCK_STREAM (tcp)
2: Application Layer

28. Chapter 2: Summary Our study of network apps now complete!
specific protocols:
HTTP
FTP
SMTP, POP, IMAP
DNS
Some applications
Web
Internet gaming, VOIP
P2P
socket programming
Application architectures
client-server
P2P
hybrid
application service requirements:
reliability, bandwidth, delay
Internet transport service model
connection-oriented, reliable: TCP
unreliable, datagrams: UDP
2: Application Layer

29. Chapter 2: Summary Most importantly: learned about protocols
typical request/reply message exchange:
client requests info or service
server responds with data, status code
message formats:
headers: fields giving info about data
data: info being communicated
control vs. data msgs
in-band, out-of-band (ftp)
centralized vs. decentralized
stateless vs. stateful
reliable vs. unreliable msg transfer
“complexity at network edge”
2: Application Layer