1. Customer Presentation
Sensor Series SC4
The New 4 mm C-Slot Sensor for Gripper and short stroke Cylinder
Customer Presentation

2. Sensor ST6 2.0 - Produktdaten
Product Data
Function Magnetic cylinder sensor for detection of the piston position
Cylinder slot 4 mm C-slot/sensor mounting
Installation Any direction, mounting from above (drop-in)
Switch output PNP, NPN
Switching logic NO (normally open)
Indicator Yellow LED
Operating voltage V to 30 V DC
Temperature range –30°C to +80°C
Protection class IP65, IP67
Material Housing: PA, glass-fiber reinforced Fitting: Stainless steel, nickel silver, brass

3. Sensor ST6 2.0 - Produktdaten
Product Data
Measuring principle GMR effect
Reproducibility ≤ 0,1 mm (T const.)
Cable material PUR
Vibration resistance to 55 Hz, 1 mm
Shock resistance 30 g, 11 ms
Wire break protection ü
Protected against polarity reversal ü
Short-circuit protected ü
EMC According to EN
Certificates cULus, CE

4. Sensor SC4 - Overview Sensor-element Funktion indicator LED
Mounting screws
Switching point
Any mounting position

5. Sensor SC4 - Drop-In assembly
Advantages of the new design (drop-in assembly)
Just insert it and fasten it quickly
Eccentric screw
Stainless steel screw
Captive screw
Fixing via quarter turn

6. Sensor SC4 - Dimensions 1 2 PNP/NPN Dimensions in mm LED indicator
Encapsulation translucent
PNP/NPN 2
Switching point
Dimensions in mm
LED indicator
Mounting screw

7. Sensor SC4 - Product versions
Connenction types
PUR cable, 3-pin
PUR / PVC cable with M8x1, 3-pin, knurled screw

8. Sensor SC4 - Application options
Mini slide MSN, MSC series
Short-stroke, compact, double piston and guide cylinders series SSI, GPC, TWC
Parallel grippers, UPG series
Cylinders PRA series

9. Sensor SC4 - Variants PNP/NPN
Type
Part no.
Wire
Material
Port
Cable
Wire end
M8 plug
M8 plug/knurled screws
M12 plug/knurled screws
PUR
0.3
0.5 3 5
PNP R PA 30 R R R
NPN R R

10. Sensor SC4 - Strengths and your advantages at a glance
Extremely short, robust housing – glass-fiber reinforced
High-strength, flexurally rigid sensor housing
Resistant to chemicals including cleaning agents and production chemicals
Very short sensor housing enables use in short-stroke cylinders and grippers
Excellent durability of the magnetic cylinder sensor
GMR and ASIC technology for utmost precision
Suppresses side lobes in the magnetic field
Precise adjustment of switching width, five times more accurate than conventional cylinder sensors
Dispersion less than 5% (market average: 25%)
Maximum reliability on all drives
Increases machine performance by guaranteeing precise switching and suppression of incorrect signals
Switching point
Drop-in mounting
Quickly insert the sensor from above into the C-slot
No removal of cylinder end caps required
Captive screw
Insert, fasten, ready!
Easy, fast installation and exchange thanks to a innovative mounting concept
Housing design and cable outlet
Very short sensor housing designed for grippers
Sensor with 90° cable outlet
No installation restrictions
Gripping section without annoying cables and thus give the operator all the necessary freedoms of movement.
Hereby raising reliability, safety and operational cost effectiveness