1. NON-EQUIL TRANSFORMATION PRODUCTS: Fe-C
• Bainite:
--a lathes (strips) with long
rods of Fe3C
--diffusion controlled.
• Isothermal Transf. Diagram
(Adapted from Fig. 10.8, Callister, 6e. (Fig from Metals Handbook, 8th ed.,
Vol. 8, Metallography, Structures, and Phase Diagrams, American Society for Metals, Materials Park, OH, 1973.)
Adapted from Fig. 10.9,Callister 6e.
(Fig adapted from H. Boyer (Ed.) Atlas of Isothermal Transformation and Cooling Transformation Diagrams, American Society for Metals, 1997, p. 28.) 9

2. OTHER PRODUCTS: Fe-C SYSTEM (1)
• Spheroidite:
--a crystals with spherical Fe3C
--diffusion dependent.
--heat bainite or pearlite for long times
--reduces interfacial area (driving force)
• Isothermal Transf. Diagram
Phase boundaries
are a form of defects
(Adapted from Fig , Callister, 6e. (Fig copyright United States Steel Corporation, 1971.)
Adapted from Fig. 10.9,Callister 6e.
(Fig adapted from H. Boyer (Ed.) Atlas of Isothermal Transformation and Cooling Transformation Diagrams, American Society for Metals, 1997, p. 28.) 10

3. OTHER PRODUCTS: Fe-C SYSTEM (2)
• Martensite:
--g(FCC) to Martensite (BCT)
Body-centered tetragonal
(Adapted from Fig , Callister, 6e.
• Isothermal Transf. Diagram
(Adapted from Fig , Callister, 6e. (Fig courtesy United States Steel Corporation.)
Adapted from Fig , Callister 6e.
• g to M transformation..
-- is rapid!
-- % transf. depends on T only (I.e. does not depend on time. In other words, it is diffusionless.. 11

4. COOLING EX: Fe-C SYSTEM (1)
Adapted from Fig , Callister 6e. 12

5. COOLING EX: Fe-C SYSTEM (2)
Adapted from Fig , Callister 6e. 13

6. COOLING EX: Fe-C SYSTEM (3)
Adapted from Fig , Callister 6e. 14

7. Effect of alloying on the Isothermal Transformation Diagram