1. Miscellaneous Updates
Month Year
doc.: IEEE yy/xxxxr0
September 2005
Miscellaneous Updates
Date: 20 September 2005
Authors:
Notice: This document has been prepared to assist IEEE It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE
Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures < ieee802.org/guides/bylaws/sb-bylaws.pdf>, including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being developed within the IEEE Working Group. If you have questions, contact the IEEE Patent Committee Administrator at
K. Sood, et al
John Doe, Some Company

2. Updates to Clause 7.2.3.1 Replace table 5 with the following: Order
September 2005
Updates to Clause
Replace table 5 with the following:
Order
Information
Notes 22
MDIE
The Mobility domain IE is only present when dot11FastTransitionEnabled is set to TRUE 23
FTIE
The Fast Transition IE is only present when dot11FastTransitionEnabled is set to TRUE 24
KHIE
The Key Holder IE is only present in beacons when dot11BeaconKHIE is set to TRUE in a Fast Transition enabled ESS and there is more than one R0KH-ID 25
Vendor Specific
One or more vendor specific information elements may appear in this frame
K. Sood, et al

3. Updates to Clause 7.2.3.9 Replace table 12 with the following: Order
September 2005
Updates to Clause
Replace table 12 with the following:
Order
Information
Notes 23
MDIE
The Mobility domain IE is only present when dot11FastTransitionEnabled is set to TRUE 24
FTIE
The Fast Transition IE is only present when dot11FastTransitionEnabled is set to TRUE 25
KHIE
The Key Holder IE is only present when dot11FastTransitionEnabled is set to TRUE and there is more than one R0KH-ID
26-n
Requested information elements
Elements requested by the Request information element of the Probe Request Frame
K. Sood, et al

4. Updates to Clause 8A.2 (Based on D0.06)
September 2005
Updates to Clause 8A.2 (Based on D0.06)
Remove the RSNIEAP[R1Name] and TIE[KeyLifetime] from message #1 in page 49 line 24 and in Figure 121H.
Update message #2 on page 49 by including the MDIETSTA after the RSNIETSTA and in Figure 121H
Update message #3 on page 49 by including the MDIETAP after the RSNIETAP and in Figure 121H
Remove the Notes on page 49
Add the following text at line 33:
While the message sequence is similar to that of Clause 8.5.3, the contents in each message shall be as described in Clause except as follows:
Message 2: the TSTA shall include the R1Name in the PMKID field of the RSNIESTA as well as including the FTIETSTA and MDIETSTA. The R1Name, FTIE TSTA, and MDIE TSTA shall be the same as that provided in the TSTA’s (re)association request.
Message 3: the TAP shall include the R1Name in the PMKID field of the RSNIEAP. The TAP shall also include the FTIETAP, MDIETAP and PTK key lifetime in the TIE[KeyLifetime]. The FTIETAP, and MDIETAP shall be the same as that advertised by the TAP’s beacon. The R1Name shall be the same as the R1Name in Message #2.
K. Sood, et al

5. Including MDIE September 2005 Add MDIE to Section 4
Add MDIE following the FTIE entry in Tables 7, 8, 9, 10, 13, 14
Text for Notes: “The mobility domain IE is used to convey the mobility domain Identifier. This IE is present in Association Request <others fill-in based on table name> that is part of a fast BSS transition”
Add MDIE to pg 12, line 2, and page 13, line 52
Add MDIE in Section 7.4.7, Action frames tables (32 S, T, U, V) with same note as Text above.
Add MDIE into Section in EAPOL key frame notation
Add MDIE into Section 8.5A.8 after FTIE, table 35A
Fix the count element to number of IEs
Add MDIE into each section of the 4 messages with text “MDIE shall contain the Mobility Domain identifier”.
Add MDIE in Figures 121D, E, F, G, H, I
Section 8A.2, add MDIE after FTIE on page 47, line 54
K. Sood, et al

6. September 2005
Motion
Instruct the TGr editor to accept the changes highlighted in r
K. Sood, et al