1. 9
Ropes and Knots

2. Introduction Instructor Introduction Topic Introduction
Class objectives
References
Preparation Step Information

3. Skill Drill 9-12 Tying a Bowline (1 of 3)
1. Make the desired sized loop and bring the working end back to the standing part.
2. Form another small loop in the standing part of the rope, with the section close to the working end on top.

4. Skill Drill 9-12 Tying a Bowline (2 of 3)
3. Pass the working end over the loop, around the standing part, and back through the same opening.
4. Tighten the knot by holding the working end and pulling the standard part of the rope backward.

5. Skill Drill 9-12 Tying a Bowline (3 of 3)
5. Tie a safety knot in the working end of the rope.