1. OBJECTIVES OF MINI PROJECT
EET209/4 DIGITAL ELECTRONICS I
OBJECTIVES OF MINI PROJECT
CO3: Ability to design digital system project applications using sequential logic design techniques.
MINI PROJECT

2. MINI PROJECT Mini project will contribute 15% of coursework marks.
Student need to form your own group (3 or 4 person per group)
Each group need to demonstrate their project during demo session at the end of semester.
Students are encouraged to attend lab session to facilitate project’s progress and do the lab exercise.
Each group need to submit Report to their course coordinator.

3. Requirement
Design an application problem based digital system that consist of minimum of 3 inputs and 2 outputs.
Apply all the state diagram (must at least have 4 condition), truth table, k-map and logic circuit
Your system can either be
Mealy Model OR
Moore Model OR
Combination of both model
Fully utilize Altera Quartus II software and the hardware need to buy on your own.

4. Application Area Green house control, agro tech Natural disaster
Industrial safety control
Smart house
Monitoring System

5. MINI PROJECT EVALUATION CONTRIBUTION Demo Session (5%)
Project Report (10%)