1. Examples of IMS 13 for VoLTE course flows
MOBILE TELEPHONY EVOLUTION
1/3/2019
Examples of IMS 13 for VoLTE course flows
Step 1: Basic Introduction
Step 3: Platforms
Step 4: Surveillance & Operation and Configuration
Interworking Nodes
IMS 13 Overview
LZU108xxxx
* Depends on the network configuration. This course may replace the IS MGW course as well as complement the SBG course. MRS includes functionalities like MGC, BGF, MRFP and ATGW.
SBG 13 Operation and Configuration for IMS
LZU108xxxx
IS 3.1 Overview
LZU
IS 3.1 Operation and Configuration
LZU
MRS 13 Operation and Configuration*
LZU108xxxx
VoLTE using MMTel
LZU
Additional Prerequisites for Step 4 training:
IP Networking, LZU102397
IP Quality of Service and MPLS, LZU
IP Security, LZU
Voice and Video over IP, LZU
MGC 13 Operation and Configuration
LZU108xxxx
IS MGW 12 Operation and Configuration
LZU
IMS Core Nodes
CUDB Operation and Service Configuration**
LZU
UDC Overview**
LZU
IMS Operation and Maintenance Advanced
LZU
IP Works 12 Operation and Maintenance for IMS
LZU
** Only required if Data Layered Architecture is applied (HSS-FE + CUDB)
EPC HSS 13 Operation and Configuration ***
LZU108xxxx
TSP 6 Operation and Maintenance
LZU
TSP 6 Overview
LZU
SAPC Operation and Configuration
LZU
IMS Signaling
LZU
Step 2: Technical Overview
*** Recommended as a part of IMS VoLTE training program if IMS and EPC HSSs are co-located. Covered by Packet Core training program otherwise.
CSCF 13 HSS/SLF 13 Operation and Configuration
LZU108xxxx
Application Servers
MMTel 13 Provisioning
LZU108xxxx
MTAS 13 Operation and Configuration
LZU108xxxx
Associated Training Programs
Prerequisite
Optional preparation
Mobile Soft Switch (MSS) 13A Training Program
Packet Core Training Program
© Ericsson AB 2012