1. Hardware Setup for Synchronization of PSG & PNA
TRIGGER IN
10 MHz Time Base
TRIGGER OUT
I/O 1 (TRIG IN)
I/O 2 (TRIG OUT
Title of Presentation
Date
Agilent Restricted

2. Firmware Setup for Synchronization of PSG & PNA
PNA setup
PSG setup:
Sweep = Step or List
Sweep trig = Free run
Point trig = Ext
Trigger In/Out Polarity = Neg
Number of points same as PNA
Procedure to synchronize sweeps:
Set PSG “Manual Mode” to On
Set PNA Trigger to Restart, then Hold
Set PSG “Manual Mode” to Off
Set PNA Trigger to Continuous or Single
Title of Presentation
Date
Agilent Restricted