1. ALTAS HABILIDADES E SUPERDOTAÇÃO
AH/SD
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.
Profa. Ma. Luciana Gomes Almeida de Souza

2. INTRODUÇÃO
Base prática e científica: prática educacional diversificada.
Consenso: é necessário haver intervenção educacional, intencional e sistematizada, para conseguir estimular e provocar desenvolvimento de capacidades e talentos
Necessidade de prover educação apropriada às características pessoais inclui alunos com AH/SD (SEESP-MEC 1994)
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

3. DESAFIOS
Maiores problemas não são de natureza material e tecnológica, mas de ordem social, política e humana.
Preocupações:
com o talento perdido por falta de estimulação e assistência.
com o talento desviado para atividades anti-sociais e destrutivas, devido a distorções na escala de valores e princípios éticos
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

4. DESAFIOS
Pesquisas vem substituindo as técnicas métricas por estratégias de qualificação das altas habilidades.
QI>150? +/- 8% da população????
Iniciativas de atendimento
Dentro da escola: escolas especiais, programas organizados nas unidades escolares, modificações de currículos, atividades extracurriculares
Fora da escola: programas e projetos de ação
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

5. DESAFIOS
Dificuldade em avaliar diferentes programas no sentido de apontar que tipo de provisão seria mais apropriado a cada situação.
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

6. DESAFIOS
Medidas metodológicas que beneficiam também alunos com deficiência...
Risco de sugerir identidade educacional em áreas opostas de excepcionalidade é chegar ao mesmo resultado final: MINIMIZAR AS CARACTERÍSTICAS DETERMINANTES DA DIFERENÇA, o que em se tratando de capacidades superiores, implica em diminuir exatamente o potencial de talento que se deseja desenvolver e aumentar!
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

7. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

8. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

9. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

10. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

11. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

12. DESAFIO Concepção da Família/Sociedade AH/SD = valor positivo
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

13. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

14. Animated balloon floats into distance (Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

15. SUPERDOTAÇÃO ESCOLAR (Advanced) Animated balloon floats into distance
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

16. IDENTIFICANDO Superdotação Escolar
RENZULLI & REIS, apud Virgolim 2007
Superdotação Escolar
Tira boas notas na escola
Apresenta grande vocabulário
Gosta de fazer perguntas
Necessita pouca repetição do conteúdo escolar
Aprende com rapidez
Apresenta longos períodos de concentração
Tem boa memória
É perseverante
Apresetna excelente raciocínio verbal e/ou numérico
É um consumidor de conhecimento
Lê por prazer
Tende a agradar aos professores
Gosta de livros técnicos/ profissionais
Tendência a gostar do ambiente escolar
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

17. CARACTERÍSTICAS AFETIVO EMOCIONAIS
IDENTIFICANDO
RENZULLI & REIS, apud Virgolim 2007
Superdotação Escolar
CARACTERÍSTICAS AFETIVO EMOCIONAIS
O superdotado do tipo “escolar tem necessidade de saber sempre mais e busca ativamente por novas aprendizagens. No entanto pode estabelecer metas irrealisticamente altas para si mesmo (às vezes reforçadas pelos pais) e sofrer por medo de não atingir tais metas
Demonstra perseverança nas atividades motivadoras a ele
Apresenta grande necessidade de estimulação mental
Apresenta grande intensidade emocional
Tem paixão em aprender
Revela intenso perfeccionismo
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

18. SUPERDOTAÇÃO CRIATIVO-PRODUTIVA
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

19. IDENTIFICANDO Superdotação Criativo-Produtiva
RENZULLI & REIS, apud Virgolim 2007
Superdotação Criativo-Produtiva
Não necessariamente apresenta QI superior
Pensa por analogia
É criativo original
Usa o humor
Demonstra diversidade de interesses
Gosta de fantasiar
Gosta de brincar com as idéias
Não liga para convenções
É inventivo, constrói novas estruturas
É sensível a detalhes
Procura novas formas de fazer as coisas
É produtor de conhecimento
Não gosta de rotina
Encontra ordem no caos
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

20. CARACTERÍSTICAS AFETIVO EMOCIONAIS
IDENTIFICANDO
RENZULLI & REIS, apud Virgolim 2007
Superdotação Criativo-Produtiva
CARACTERÍSTICAS AFETIVO EMOCIONAIS
Investem uma quantidade significativa de energia emocional naquilo que fazem
Apresentam preocupação moral em idades precoces
Necessitam de professores sensíveis aos seus intensos sentimentos de frustração, paixão, entusiasmo, raiva e desespero
Precisam do apoio dos adultos para persistir em suas tarefas ou para canalizar suas energias de forma mais eficiente
Frequentemente questionam regras e autoridade
Demonstram sensibilidade e empatia
Demonstram auto consciência
Demonstram perceptividade (insight)
Demonstram capacidade de reflexão
Apresentam senso agudo de justiça
Apresentam imaginação vívida
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

21. UMA REALIDADE
CEDET: Centro de Desenvolvimento do Potencial e Talentos de Lavras – MG, criado em 1993.
ASPAT: Associação de Pais e Amigos para apoio ao Talento.
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

22. O trabalho educacional do CEDET visa não somente desenvolver as capacidades e talentos das crianças identificadas, mas também promover o crescimento pessoal e formação de personalidade sadia, na direção preconizada pela psicologia e educação humanista, envolvendo a) desenvolvimento de autoconceito realista e positivo; b) cultivo da sensibilidade, conhecimento e respeito ao outro; e c) construção de um quadro referencial interno que permita uma visão de mundo ampla, rica e bem informada.
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

23. CEDET
1 – AUTO CONCEITO: o “próprio eu”, estudos focalizando motivação e envolvimento com a tarefa, capacidade de auto regulação e conceito de “wisdom” (sabedoria).
2 – CONSTRUÇÃO DO CARÁTER E CULTIVO DA MORALIDADE: intencional e sistematicamente cultivadas pelo processo educativo. Ideia de vivência comum e harmoniosa com o outro (desenvolvimento social)
3 – FORMAÇÃO DA VISÃO DE MUNDO: conceitos científicos cultivados em várias áreas da ciência.
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

24. CEDET Rede de influência: equipe, família, escola, sociedade.
Contra turno escolar.
Plano Individual de Trabalho, Grupos de Interesse e Encontros Gerais
Processo de identificação:
Observação direta por professores
Revisão, avaliação e complementação
Observação assistida de 1 ano letivo por especialista
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

25. PECULIARIDADES – CEDET
Contato com um grupo de pares maior e diversificado.
Interação com diferentes adultos: o facilitador que orienta o plano educacional de cada cça, individualmente, os voluntários que orientam diversas atividades de conteúdo, os estagiários, visitantes e outras pessoas que trabalham no centro
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

26. PECULIARIDADES – CEDET
Recebem alunos com deficiências diversas que possam ter altas habilidades conjugadas
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

27. REFERÊNCIAS
GUENTHER, Zenita, C. CEDET: um centro comunitário para desenvolvimento de talentos em Minas Gerais, Brasil. In: VALLE, Luiza Elena Leite Ribeiro do. Temas Multidisciplinares de neuropsicologia e aprendizagem. Ribeirão Preto-SP, Tecmedd, 2004.
FLEITH, Denise de Souza. Educação infantil: saberes e práticas da inclusão – altas habilidades e superdotação. 4ª. Ed. Brasília-DF, MEC, Secretaria de Educação Especial, 2006.
VIRGOLIM, Angela M.R. Altas habilidades/superdotação: encorajando potenciais. Brasília-DF: MEC, Secretaria de Educação Especial, 2007.
Animated balloon floats into distance
(Advanced)
To reproduce the balloon on this slide, do the following:
On the Home tab, in the Drawing group, click Shapes, under Basic Shapes, click Teardrop (second row, fourth from the left). On the slide, drag to draw the teardrop.
On the Home tab, in the Slides group, click Layout, and then click Blank.
Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher, and then in the Format Shape dialog box, click Size in the left pane. In the Size pane, under Size and rotate, do the following:
In the Rotation box, enter 133⁰.
In the Width box, enter 1.7”.
In the Height box, enter 1.66”.
Also in In the Format Shape dialog box click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
In the Angle box, enter 90.
In the Type list, select Linear.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop in the slider, and then do the following:
In the Transparency box, enter 0%.
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Position box, enter 13%.
Select the next stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click Red, Accent 2, Lighter 40% (fourth row, sixth option from the left).
In the Position box, enter 66%.
Select the last stop in the slider, and then do the following:
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Position box, enter 100%.
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes, click Isosceles Triangle (third option from the left). On the slide, drag to draw the isosceles triangle.
Also in the Format Shape dialog box in the left pane, click Line Color, and in the Line Color pane, select No line.
Select the isosceles triangle. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane. in the Size pane, under Size and rotate, do the following:
In the Height box, enter 0.16”.
Also in the Format Shape dialog box, in the left pane, click Fill. In the Fill pane, click Solid Fill. Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).
In the Rotation box, enter 8⁰.
In the Width box, enter 0.11”.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane select No line.
Select the curvy line. On the Home tab, in the Drawing group, click the arrow next to Shape Outline, and then under Theme Colors, click White, Background 1, Darker 15% (third row, first option from the left).
On the Home tab, in the Drawing group, click Shapes, and under Lines click Curve (tenth option from the right). On the slide, draw a curve (for, example, one that has four points). Press ESC to end the curve.
Position the isosceles triangle on the slide so that the sharp angle touches the point of the teardrop.
On the Home, in the Drawing group, click Shape Outline, point to Weight, and then click 1 pt.
Select the oval. Under Drawing Tools, on the Format tab, in the Size group do the following:
On the Home tab, in the Drawing group, click Shapes, and under Basic Shapes, select Oval (second option from the left). On the slide, drag to draw an oval.
Position the curve on your slide so that one end is touching the bottom edge of the isosceles triangle.
In the Shape Height box, enter 1.2”.
In the Format Shape dialog box, in the left pane click Fill. In the Fill pane, select Gradient fill.
Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients.
In the Shape Width box, enter 1.2”.
Click the button next to Direction, and then click From Center (third option from the left).
In the Type list, select Radial.
In the Position box, enter 0%.
In the Position box, enter 50%.
In the Transparency box, enter 81%.
In the Position box, enter 71%.
Position the oval at the top, left edge of the teardrop to create a lighting effect.
Also in the Format Shape dialog box in the left pane, click Line Color, and then in the Line Color pane click No line.
In the Transparency box, enter 100%.
Press and hold CTRL, and then select all four objects. On the Home tab, in the Drawing group, click Arrange, and then under Group Objects click Group.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Motion Path dialog box, under Lines & Curves, click Diagonal Up Right, and then click OK.
On the slide, select the balloon and drag it off the bottom left corner of the slide.
On the slide, select the motion path and then drag the end point (red triangle) across the slide and off the top right corner.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Timing group, in the Duration box, enter 32.
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the Animations tab, in the Animation group, click Effect Options, and then click the Show Additional Effect Options dialog box launcher. In the Grow/Shrink dialog box, under Settings, click the arrow next to the Size box and in the Custom box, enter 2%.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the sky background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.  
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.