1. Art & Design – CERAMICS (Assessed for Entry 3)
Example task: A decorative holder for a tea light, with cut out shapes to allow light
to create patterns on its surroundings.

2. AC1.1 Select a range of references and resources
to support ceramic work.
This AC is well covered by accessing a range of
different references from a variety of cultures and
styles.
Many of these refer to lights and lanterns.

3. AC1.2 Produce visual and / or tactile records of observations and
experiences relating to a task or theme.
This area could be covered more thoroughly. Whilst there is ample evidence of information gathered from the internet (AC1.1) There is only limited evidence of the pupil’s own visual or tactile observations. This could have been achieved using sketch/notebooks, photography and appropriate 3D modelling.
AC1.3 Identify the influence of artists, craftspersons
and / or designers on their own practice.
Evidence of this can be seen
throughout the work, which
clearly demonstrates the
influence of the Celtic Art
and Art Nouveau references.

4. AC2.1 Select and handle materials, tools and techniques appropriate to ceramics.
This is an area that needs attention.
There is too much evidence of graphic skills and not enough evidence of materials, tools and techniques appropriate to
ceramics.
This might have included evidence of the pupil experimenting with different ceramic construction methods, mark making in clay and examples of decorative finishes.
Some of the evidence for the above could have been identified during the making process and recorded
by means of photographs.

5. Clear evidence of development of ideas; in shape, surface
AC2.2 Use visual elements in practical work, such as: colour; pattern; texture; line;
shape; form; space; tone.
The amplification of content within the specification suggests that form, space, pattern, texture and colour lend themselves to this area of study.
In this particular unit of work form, space and texture could have been more fully explored if the emphasis had been on ceramic processes.
AC2.3 Develop ideas for a ceramic
outcome, modifying work as needed.
Clear evidence of development
of ideas; in shape, surface
pattern and decoration.

6. Slabbing and coiling techniques, and good surface decoration
AC3.1 Use ceramic processes to produce an outcome in response to a task or theme
AC3.2 Present a resolved ceramics outcome with some consideration of refinement.
Slabbing and coiling techniques,
and good surface decoration
have been combined to produce
a refined finished piece in
response to the task set.

7. General Comments
This ceramics unit contains a lot of very high quality work and clearly the pupil is more than capable of achieving an Entry 3. However, as the work stands it would be difficult for it to fulfil all the criteria of the new Entry Pathways specification.
The main concerns have already been highlighted as AC1.2, AC2.1 and to a lesser extent AC2.2.
To fulfil the criteria would require, not more work but, a change of emphasis. The amplification of content within the specification states that:
“Although other materials, tools and techniques will be used during the course, particularly during research, the emphasis should be on ceramic processes”.
In this particular unit much of the graphic development could be replaced with ceramic based ideas.