1. The key to comfort and efficiency for heating and air-conditioning
Exquisite Heat
The key to comfort and efficiency for heating and air-conditioning

2. Global Energy Security St. Petersburg, July 16, 2006
growing demand for energy (estimated to rise by more than 50% by the year 2030, approximately 80% of which would still be met by fossil fuels, which are limited resources);
January 11, 2019

3. A few Numbers for the record.
US Energy Information Agency: 2001
Natural Gas 59,300,000 homes
Electricity 31,100,000
Fuel Oil ,000,000
LPG ,000,000
wood, Kerosene, solar 3,500,000
Total ,050,000 homes in US
January 11, 2019

4. 15% fuel savings/4yr payback/$1000
January 11, 2019

5. 1/11/2019
A word about savings.
Every building has a different relationship with its heating plant.
Some waste a lot. Most waste a lot.
Most have comfort problems.
Savings on fuels can range from 5-30%
Exquisite Heat will run it more comfortably and efficiently for sure.
January 11, 2019

6. Reduction of chimney waste
Air Pollutants: CO2, NO, etc.
Particulates & heat
January 11, 2019

7. Efficiency Reduced standby loss. Increased exchange circulation
Reduced piping loss.
Better convection at baseboard and radiators
Less back wall radiation loss
Reduced piping radiation loss
Less BTU generation to satisfy comfort needs on less then design degree days.
January 11, 2019

8. January 11, 2019

9. January 11, 2019

10. How??
Precise building
BTU replacement
for BTU loss.
January 11, 2019

11. Exquisite Heat
Adjusts heating/cooling supply temperature in response to Thermostat demand history.
January 11, 2019

12. Even BTU distribution
Lower heating plant (boiler/furnace) temperatures allow for more evenly delivered temperature to the space.
January 11, 2019

13. Temperature vs. Thermostat
The lower the medium temperature the longer it will take the thermostat to sense the change.
???
January 11, 2019

14. January 11, 2019

15. Simple Attachment Two wire Thermostat parallel connection input.
Attach thermistor to supply output.
Connect control relay in series.
Plug in transformer to AC outlet.
Program system variables.
Revisit until satisfied with installation settings.
January 11, 2019

16. January 11, 2019

17. January 11, 2019

18. January 11, 2019

19. January 11, 2019

20. January 11, 2019

21. What happened? A changed philosophy of boiler control.
The new goal is to satisfy an Ideal Thermostat Demand ratio.
As Actual Thermostat Demand changes in relation to Ideal Thermostat Demand, the boiler output is adjusted every hour.
January 11, 2019

22. Funding You have been picking the low hanging fruit.
It is time to learn about energy efficiency.
The problem is not going to be solved through tax breaks and government guarantees.
The answer is not a financial trick from Wall Street.
The environment does not care.
January 11, 2019

23. The Hard facts Folks have to be educated. Folks have to change.
Advertising strategies.
Technology deployment.
Professional education and technical training.
Renewable energy sources are only part of the answer.
January 11, 2019

24. We have a Mission ! Attitudes. Education Political credibility.
Allocation of resources.
Promotion of new social values.
Advertisement of new priorities.
Progress reports and praise.
January 11, 2019

25. Profit There is profit and return in:
Conservation of limited resources.
Potential savings on efficiency.
Return on investment with the new technology and the resulting economic savings.
These measures more than pay for themselves.
January 11, 2019

26. Increased circulation delivers even comfort.
Assumption 1
Increased circulation delivers even comfort.
January 11, 2019

27. Assumption 2.
The closer the heating plant temperature is to the room temperature requirement, the more fuel efficient the system.
January 11, 2019

28. January 11, 2019

29. January 11, 2019

30. Thermostat
The thermostat takes all heat loss and heat gain into consideration.
The customer can adjust thermostat for personal comfort.
Thermostat activity can be used to adjust boiler, HVAC output to satisfy the space with ideal circulation.
The thermostat and energy source interact for comfort and efficiency.
January 11, 2019

31. Outdoor Reset Controls
They were part of the answer over the past 40 years. They were not as accurate as
January 11, 2019

32. Thermostat Data
Data from the thermostat, for adjusting boiler, furnace, AC control, provides real information about occupants, building heat loss, and influences of wind, solar gain and system design . MZ-308 makes the process seamlessly fuel efficient and comfortable for even distribution throughout the structure.
January 11, 2019

33. Domestic Hot Water
A Second thermistor is provided to monitor domestic Hot water. If the Thermostat does not call for heat for one hour the second thermistor is used to satisfy domestic hot water limit temperatures.
January 11, 2019

34. Cold Start
Menu adjustment is made for ability to operate boiler in “cold start” mode and calculate the limits based upon behavior while heating.
January 11, 2019

35. Multi Zone Satisfaction
Most cases are satisfied by attaching analysis zone to chilly zone in system. The rest of the zones will float with variable circulation for the hour.
January 11, 2019

36. Multi Thermostat Analysis
A second thermostat sensing input is provided if needed, so the control will choose the higher Actual Demand Data for analysis purposes. This is helpful if the building has unusual characteristics.
January 11, 2019

37. Boiler Protection
Established low temperature limits are provided for within the control. Allowance for boiler piping for protection is provided for by tasking control temperature readings on the secondary loop of the boiler piping.
January 11, 2019

38. Steam Control
Steam boilers can be made more precise with Exquisite Heat Control.
Reduce overshoot in steam delivery.
Temper supply to thermostat demand.
Reduce discomfort and waste.
Shut those open windows.
Reduce complaints of discomfort.
January 11, 2019

39. January 11, 2019

40. What has been done Changed the philosophy of boiler control.
The new goal is to give heat to satisfy a fixed Ideal Thermostat Demand ratio.
We adjust the boiler output to meet that Ideal demand at the thermostat.
We provide a more comfortable and more efficient method of heating interior space.
January 11, 2019

41. Shut Down In the event of a control shut down:
Power failure
Computer switches “disconnect control relay” off and returns HVAC to in series factory low voltage fire controls.

42. Alarms
Normally open or closed alarm relay is activated upon shut down, or safety settings.
Trigger local alarm, communicator, or security system.
Alarm central or direct dialer to owner and/or contractor.
Additional flood, heat, smoke detection.

44. Day after day. Year after year. It more than pays for itself.
Cash Flow +
Day after day.
Year after year. It more than pays for itself.

45. Free of Charge The feature customers notice first
Added Comfort
Free of Charge
The feature
customers notice first

46. Unconditional Guarantee
Exquisite Heat will exchange failed equipment for five years. Lease and rental replacement will occur for the term of the agreement.
Equipment will be removed and rental agreement cancelled provided Accounts are current. ( Do it Right!!! )
We are here to refine comfort and efficiency.
January 11, 2019

47. Manufacturers
Now have the opportunity to develop efficient boilers and deliver system efficiently to the final comfort recipient.
January 11, 2019

48. Heating Contractors
have the opportunity to deliver unprecedented comfort and efficiency to their customers.
Exquisite Heat offers the best in class for controlling existing buildings without the need for major renovation.
January 11, 2019

49. John Cockerill Exquisite Heat www.Exqheat.com 914-588-4791
Thank you !!
John Cockerill Exquisite Heat
US Patent 6,402, /18/01