1. Isotropic View Conceptual Design for MONALISA setup at CERN Magnet
Rotatable Bellow
Flange 1
Table
Flange
Foot Stand
Rotatable Bellow
Flange 2
Ground
Vacuum Tube
Isotropic View

2. Conceptual Design for MONALISA setup at CERN
Cross Sectional View
Flexible device such as
Rotatable Bellow to be
Used as interface
Between the magnet
And the vacuum tube
Space for
Foot stand
Retroreflector
Launch Head
Detail View

3. Conceptual Design for MONALISA setup at CERN
Front View

4. Conceptual Design for MONALISA setup at CERN
End View

5. Conceptual Design for MONALISA setup at CERN
Need ‘outside the box’ thinking on how to establish the beam path across the boundaries

6. Design notes:
This is a conceptual draft only.
There is no attempt here to link the support table to the floor.
Details of the measurement devices are not shown.
Any beam paths which are not vertical, will need a different design for the vacuum vessel. This has yet to be considered in detail.
It is currently assumed that there are no magnetism issues to be considered. This should be verified before the final design approval.
The relative thermal expansion of various parts within the design will need to be understood once a more detailed concept has been produced.