1. Smart CE Marking

2. What is Smart CE Marking?
is the link between the physical product and its DoP in a digital, machine readable format
allows designers, processor (contractors), end users, but also authorities accessing and assessing*) the comprehensive information within the DoP in a user friendly, target oriented manner
helps designers and processors comply with their documentation duties and reduces the administrative burden*)
closes the circle contract planning/design  execution*)
allows tracing products to the place of their installation*)
is the direct link for the manufacturer to his clients*)
*) in combination with appropriate digital tools

3. What else is Smart CE Marking?
is not BIM, but it is BIM compatible
is beneficial and of use even where BIM is not or and/or is not being used

4. Check App

5. Where are we with Smart CE Marking?
State of affairs and next steps
CPE pilot project
has been finalised
feasibility has been proven for 5 standards
internal XML reference document drafted
CEN Work Shop Agreement (CWA) to provide a citable XML reference document is ongoing and will be concluded by summer
Implementation into product standards can start after CWA
Products standards are generally not yet fit for digitalisation
National application rules/standards may need to be taken into consideration

6. ECSPA has developed a “´check app”
And in the mean time?
ECSPA has developed a “´check app”
To demonstrate that Smart CE Marking is better than “Stupid CE“ and can replace it!

7. Demo-Check-App

8. Demo-Check-App Results must be the same independent of the App
Should be validated per product at EU level
Should be validated per product at national level
Possible approach: Separate “check-engines“ which run on selected servers!

9. Industry Support Needed