1. Christmas Card Box
Marcus P. Dula

2. Cut the card apart separating the front from the back

3. Fold card front on a diagonal & cut off excess creating a square

4. Fold the square diagonally each direction then open it back up

5. Fold each corner in to the center of the original square

6. Fold each side of the new, smaller square into the center then completely unfold

7. From two opposing corners cut along the crease two blocks toward the center and stop.
Two opposing corners ONLY, not all four!

8. From the corners that were not cut, fold the small ears in, fold the top portion down then fold the ears in again

9. Last fold the corners that were cut, up and over the sides covering the ears. All corners should converge in the center.

10. Using the card back follow the same steps to create the bottom of the box. Leave a 1/8” margin and trim off all excess. This ensures the bottom of the box will fit inside the top.

11. The center of the card front should be centered on the box top
Merry Christmas!