1. HD-SDI IR BULLET CAMERA
SPECIFICATIONS
MEMO
HD-SDI IR BULLET CAMERA
Defog
Lens
AUTO / B.W / COLOR / EXT
Sense-up
Electronic Shutter Speed
NTSC : 1/30~1/60,000sec, PAL : 1/25~1/50,000sec
Video Output Mode
1080P
Signal Format
NTSC/PAL (Selectable)
Effective Pixels
1944(H) x 1092(V) = 2,122,848 (Pixel)
Image Sensor
1/3” 2.1Megapixel Panasonic CMOS
-10°C ~ +50°C
Operating Temperature
Less than 90%
Operating Humidity
99(Ø) x 299.8(H)mm
Dimension
DC 12V (±10%)
Power Supply
LED Off : Max. 2.5W / LED On : Max. 10.0W
Power Consumption
More 50dB
S/N Ratio
OFF / ON
Privacy Masking
SDI-UP242IRV
Video Output Level
0.5Lux(Color), 0.1Lux(B&W), 0.001Lux(Sens-up x8)
Min. Illumination
White Balance
Backlight Compensation
OFF / HLC /BLC /WDR
D-WDR
0 ~ 20
Approx. 1.2Kg (W/Sunshield & Bracket)
Weight
Progressive Scan
Scanning System
MIRROR / D-ZOOM / FLIP
D-EFFECT
ON / OFF
ON / OFF (16 ZOOM)
OFF /ON
Flickerless
OSD
RS-485 (Pelco-D & Peko-C)
Digital Zoom
Eng / Jpn / Chi
Communication
OFF / LOW / MIDDLE / HIGH
2D + 3D DNR
X2 ~ x8
Motion Detection
HD-SDI / CVBS : 1.0Vp-p /75Ω (W/O WDR)
SELECTA
X1.0~ x8.0
AUTO / AUTOEXT / PRESET / MANUAL
Day & Night
USER’S MANUAL
Iris Control
Gain Control
SDI-UP242IRV
OFF /ON
FEATURES
• 1/3” 2.1Megapixel Progressive Panasonic CMOS •
• Min. Illumination of 0.001Lux(Sense-up x8)
• True Day & Night
• NTSC/PAL selectable
• Defog(Visibility enhancement on the low contrast scene)
• High resolution digital zoom (x8)
• 2D & 3D Digital Noise Reduction
• Flicker Suppression
• Motion Detection, Privacy Masking (16 Zone)
• 42pcs IR LED
• DC Varifocal ICR Lens 2.8~12mm
• IP66 Weatherproof
• External Focus / Zoom & OSD Controller
• Option : RS-485
DC Varifocal ICR Lens 2.8~12mm
IR LED
42pcs
* In accordance with customers’ request and OSD controller’s option, the specifications can be fixed or changed without notice.

2. OSD CONTROL (Option- BOARD / CABLE)
PRECAUTIONS
NAME OF EACH PART
OSD CONTROL (Option- BOARD / CABLE)
Video loop-out
OSD Controller UP
DOWN R L a
• Do not install the camera in extreme temperature conditions. - Only use the camera under conditions where temperatures are between -10°Cand +50°C. Be especially careful to provide ventilation when operating under high temperatures.
• Do not install or use the camera in an environment where the humidity is high. - It can cause the image quality to be poor.
• Do not install the camera under unstable lighting conditions. - Severe lighting change or flicker can cause the camera to work improperly.
• Never use the camera close to a gas or oil leak. - It can cause malfunctions to occur.
• Do not disassemble the camera. - There are no user-serviceable parts inside it.
• Do not touch the front lens of the camera. - It is one of the most important parts of the camera. Be careful not to be stained by fingerprint.
• Never keep the camera face to strong light directly. - It can damage the image sensor.
• Do not drop the camera or subject them to physical shocks. - It can cause malfunctions to occur.
• Do not expose the camera to rain or spill beverage on it. - If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the electronic components.
• Do not expose the camera to radioactivity. - If exposed to radioactivity the image sensor will fail.
* NOTE *
• If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.
• Please check that the power satisfies the normal specification before connecting the camera.
Bracket
Sunshield
Lens
IR LED
CABLE CONNECTION
Video loop-out
HD-SDI output
Power input (DC 12V)
Video cable (Option)
Red : RS-485+ / Yellow : RS-485- White : Motion output / Black : GND (Option)
a. SET : Displays the menu on the screen. Press this switch to confirm status or after changing a selected item.
b. UP / DOWN : Used to move the cursor up or down in the menu screen to select a desired menu item.
c. LEFT / RIGHT : Used to move the cursor left or right in the menu screen or to change the value of the selected item.
DIMENSION
External Focus / Zoom
Focus
COMPOSITION
Zoom
Camera
Video cable
Power cable
RS-485 cable (Option)
Screw
L- Wrench
Manual