Download presentation
Presentation is loading. Please wait.
Published byWidyawati Sanjaya Modified over 6 years ago
1
The Fill Pattern Monitor For the Australian Synchrotron
David Peake Supervisors: Dr Roger Rassool Dr Mark Boland
2
The Australian Synchrotron
3 GeV 100 MeV
3
The Storage Ring 720 ns
4
Aims of This Project Quantify beam characteristics
Optimize injection parameters to: increase the maximum stored current increase the lifetime of the beam Lower the frequency of re-injection
5
Initial Beam Profile Injected current is not evenly spread
Current example of beam profile: 720 ns
6
An Ideal Beam Profile Stored current is spread evenly across the entire period 35 ps 720 ns 2 ns
7
û ü û ü Measurement Methods Directly measure the electrons in the ring
Measure the synchrotron light X-rays Visible Light ü û ü
8
The Requirements A photodiode with a super fast rise time
A digitiser with a rapid sampling rate In our device the key component will be a high speed MSM photodiode
9
MSM Photodiode
10
ü ü ü Experimental Setup Fill Pattern Monitor (FPM) DC-30 GHz 14 GHz
Bending Magnet 1 Electron beam X-rays (Not to Scale) Optical Chicane Fill Pattern Monitor (FPM) MSM AMP DIG Visible Light ü ü ü DC-30 GHz 14 GHz 8 GS/s
12
Results Tuesday 17th of October – 12:15 am A single bunch was measured
13
How do we know? Need to validate the results against well used diagnostic devices
14
Injection Delay Placed a delay into the injection timing, and injected from the booster ring.
15
Australian Synchrotron Milestone
Two days later, the FPM was used to achieve the following major milestone… A maximum current of 100 mA A beam lifetime of 12 hours (a 50% increase) “Couldn’t get the smiles off their faces”
16
Continuous Top Up Mode The Australian Synchrotron is now capable of running in continuous top up mode This is a world first
17
Summary Able to digitise a single 35 ps light pulse
Can measure the beam profile in real time Information from the FPM has already resulted in a higher maximum current and a 50% increase in beam lifetime.
18
Acknowledgements Dr Roger Rassool Dr Mark Boland
The Accelerator Group at the Australian Synchrotron.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.