1. November 2013
doc.: IEEE /1381r0
Telecommunications and Information Exchange Between Systems ISO/IEC JTC 1/SC 6
Document Number: 6N15925
Date:
Replaces:
Document Type: Liaison Organization Contribution
Document Title: Request to SC6 to allocate revision responsibility of the ISO/IEC/IEEE Standards to the IEEE Working Group
Document Source: IEEE 802
Project Number:
Document Status: For Consideration at the SC 6/WG 1 meeting
Action ID: FYI
Due Date:
No. of Pages: 5
ISO/IEC JTC1/SC6 Secretariat Ms. Jooran Lee, KSA (on behalf of KATS)
Korea Technology Center #701-7 Yeoksam-dong, Gangnam-gu, Seoul, , Republic of Korea ;
Telephone: ; Facsimile: ;
IEEE 802 EC
Jon Rosdahl, CSR

2. November 2013
doc.: IEEE /1381r0
Request to SC6 to allocate revision responsibility of the ISO/IEC/IEEE Standards to the IEEE Working Group
Date:
Authors:
Abstract: This document provides responses to FDIS 60 days ballot comments on IEEE Std
IEEE 802 EC
Jon Rosdahl, CSR

3. Request to SC6 to allocate revision responsibility of the ISO/IEC/IEEE Standards to the IEEE Working Group
IEEE 802.1/3/11/22 standards are being liaised to ISO/IEC JTC1/SC6 for ratification under the PSDO based on an agreement by SC6 that the relevant IEEE 802 WG has responsibility for the revision process
The agreement by SC6 is based on the existence of an established mechanism for NBs to contribute to the revision process in the IEEE 802 WG
This process is documented in N15606
The agreement was ratified by resolutions in SC6 in relation to each of IEEE 802.1/3/11
IEEE WG requests a similar agreement in relation to ISO/IECIEEE Standards
IEEE 802 EC

4. Request to SC6 to allocate revision responsibility of the ISO/IEC/IEEE Standards to the IEEE Working Group
Proposed liaison to SC6 (part 1/2)
The IEEE Working Group is currently making use of the PSDO agreement between ISO and IEEE to enable ISO/IEC JTC1 NBs to review and ratify IEEE standards as ISO/IEC/IEEE standards
The IEEE Working Group is using the same processes as those being used to enable the review and ratification the ISO/IEC/IEEE 802-1/3/11 series of standards, including those processes specified in 6N15606
ISO/IEC JTC1/SC6 has made the use of those processes the basis of resolutions within SC6 to allocate responsibility for the revision process of the ISO/IEC /3/11 series of standards to the relevant IEEE 802 Working Group
IEEE 802 EC

5. Request to SC6 to allocate revision responsibility of the ISO/IEC/IEEE Standards to the IEEE Working Group
Proposed liaison to SC6 (part 1/2)
The IEEE Working Group requests that SC6 adopts the following similar resolution with respect to the ISO/IEC/IEEE series of standards
As empowered by clause A1.2.1 of the PSDO agreement between ISO and IEEE, SC 6 decides to allocate responsibility for the revision process of the ISO/IEC/IEEE series of standards to the IEEE Working Group while the IEEE Working Group has an ongoing revision process for the IEEE standard. A condition of this resolution is that SC 6 and its NBs have access to an established mechanism to contribute to the revision process in the IEEE Working Group .
Note that this proposed resolution is in the same form as Resolutions 6.1.9/10/11 that were approved in September 2012 at the ISO/IEC JTC 1/SC 6 plenary meeting in Gratkorn/Graz, Austria
IEEE 802 EC