1. Circles & Drawing Aids

2. To access the units settings in CAD type UNITS <Enter>

3. Drafting Settings
To enter drafting settings type DS <Enter> or click on the drop down menu on the snap mode, and click on settings

4. Layers

5. Adding New Layers Click on layer properties Click on add new layer
Double click on layer name to change

6. Assigning Colors to Layers
Open up layer properties
Click on color box
Change color to correspond with layer type

7. Linetypes and Lineweights
To change line types and weights click on layer properties, and click on Linetypes

8. Linetypes and Lineweights
Scroll to desired linetype and
double click to load.

9. LTScale To change the scale of the Line Type Type lts <ENTER>
Enter a new value
Larger the scale value the more pronounced the spacing between lines

10. Fillet Pick the Fillet tool from the ribbon or type f <ENTER>
Right click and select radius from the shortcut menu or type r <Enter>
Enter radius value
For multiple fillets type m <Enter>
Select the two lines that meat at a corner

11. Chamfer Chamfer tool is found in the Fillet ribbon, or by entering
Cha <Enter>
Right-click and select distance from the shortcut menu or type d <Enter>
Enter chamfer distance
Enter a second distance or press <Enter> for an even chamfer
Type m <Enter> to perform chamfers on multiple corners
Select two lines that meet at a corner