1. Welcome to the Introduction of SPICE Flex

2. SPICE Flex advantages Flexible Modular
Customer demand is in Focus
Modular
Controls grow with the Project requirement
Customer specific processes are programmible
All requirements are considered
Is from a basic function to the smallest production automation applicable
wide range of accessories

3. SPICE Flex The controls are certified according to
EG machine regulations 2006/42/EG
reference to design will be observed
The EMV regulations 2004/108/EG are achieved
The controls have wide interests of redundant inquirys and the redundant valve switching has maximum safety

4. SPICE Flex front view

5. SPICE Flex back view

6. ETHERNET (remote maintenance)
SPICE Flex upgrading
BASIC
PRO
SAFETY MS
ADVANCED
ETHERNET (remote maintenance)
Div. Gateways

7. SPICE Flex basic objectives
The setting mode allows all functions to be manual controlled
All connections except for the outer supply line and ground fault can be disconnected
The power supply is safe of vibration and includes Power-Boost Technology
Touchpanel is graphic with Web function
Problem finding in less than 15 min.

8. SPICE Flex BASIC Accustomed press function
Request for extern activation. Terms have to be made so the Press can be activated
Optical and acoustical display of disturbance
Disturbance information about operation status or not accomplished tasks will be shown in clear text.
Programmible item counter with adjustable properties when specified value is achieved

9. SPICE Flex BASIC Programmable holding time in steps shown in seconds
Air pressure and valve positioner is controlled for maximal safety by variations in air pressure
Digital air pressure display with main valve
Redundant safety valve block
Remote maintenance is available with option package
Plug-in socket on the back of control box

10. SPICE Flex PRO Installation of a sliding table is possible
Foot control by safe tooling possible
Installation of a round table is in preparation (planned)

11. SPICE Flex MS Interaction with the Gechter measuring system MS00
Power turn-off Function is selectable (option)
NIO (Not OK) properties are adjustable
Optional package for two speed rates can be installed with on-off function

12. SPICE Flex SAFETY
One hand control and automated process (only by installed external protection equipment)
Protection housing with light grid or protection door can be installed
Protection cover according to MTM guidelines can be installed
Option for actuator (buzzer / foot switch / Captron)

13. SPICE Flex ADVANCED Customer Interface with 8E and 4A
Smaller Automation tasks like defect parts grabber or belt feed can be installed according to Customer specifications
A Sensor-/ Actor box can be ordered for the Signal interchange

14. SPICE Flex Information
Emergency stop activated
Initial position not reached
Air pressure error
No operation mode selected
Error valve position
OT (out of tolerance) and UT (under tolerance) Error
Alarm power barrier is reached

15. SPICE Flex Initial Operation
Connect air pressure supply
Turn on controls with main switch
Change into set-up mode
Adapt configuration set-up
Exit set-up mode
Turn on controls
Press goes into initial position and is ready for operation

16. Customer advantages Can be additionally upgraded
Specific Customer variations are possible
The control types can be created and shaped to fit for customer control variations
Multivarious combination possibilities and substantial accessories mark the SPICE Flex control
Maximal performance + maximal safety = maximal Customer satisfaction

17. Thank you for your attention
END
Thank you for your attention