1. Resetting and long beep test for PCB without digital display
Step for resetting and long beep:
Connect the PCB with machine.
Switch on the machine from power supply board.
Do not switch on the power button of PCB.
Ensure there should not be water and cloth load in machine.
Press program (SW3) and process (SW4) button simultaneously and wait.
3 program LED will simultaneously blink along with 6 small beep sound.
At the end one long beep sound will come and machine gets off.
Press the power button and then press start button and keep it pressed. After 6 rotation of pulsator fuzzy light should glow.
Applicable Models
Digi Pacific, Digi Atlantic, Digi Rainbow, Digi Wave, Digi Aqua, KF-6011, KF-6511
Process and program button to be pressed simultaneously

2. Resetting and long beep test for DIGI SPRING
PCB with digital display
Step for resetting and long beep:
Connect the PCB with machine.
Switch on the machine from power supply board.
Ensure that there should not be water or clothe load in machine. It should be empty.
Press power and water level (WL) button simultaneously and wait.
Machine will be silent for 6 sec and display will show dr.
At the end long beep sound will come and machine gets off.
Press the power button and then press start button and keep it pressed. After 6 rotation of pulsator fuzzy light should glow.
Applicable Models
Digi Spring
Power and water level button to be press simultaneously