1. Hall C – this week Time Period Plans 10/24-10/27 Target cool down
Restricted access
Lockup by swing shift
Radcon checklist
Complete ion chamber calibration
Detector checkout (5 pass)
10/27
Energy change
Optics checkout (2 pass)
10/30
Start production data taking Ebeam=2.528 GeV
(5 pass)
Need combined optics (Moller quads ON)

2. Hall C – Beam Requirements Type Requirement
Positions (Δx, Δy)
< 0.2mm
Energy
< 5 x 10-4
ΔE/E
< 10-4
Beam size
100 x 100 μm
Raster
2 x 2 mm FW
Polarization
As high as possible
Beam currents
Up to 80 μA
Beam Polarization will be measured using Hall C Moller

3. Hall C – special tasks BCM calibration
Moller commissioning during Ebeam=2.528 GeV (after 10/30)
First energy measurement and BCM calibrations during Ebeam=4 GeV (800 MeV) running (11/6?)