1. Chemical Monitoring on-site 3
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Chemical Monitoring on-site 3
Comparison of Monitoring Approaches
for Selected Priority Pollutants in Surface Water
A JRC IES - Chemical Monitoring Initiative in support to the Water Framework Directive implementation
in collaboration with IRSA-CNR, Italy
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

2. Follow-up of CMA on-site 1 +2
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Comparison of Member State laboratories analytical results for selected priority pollutants on a single site
Follow-up of CMA on-site 1 +2
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

3. NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
CM on-site 3 campaign hosted on 5./ in Eijsden, Netherlands, Meuse River, water quality monitoring station
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 3

4. 16 participating laboratories nominated by MS
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
16 participating laboratories nominated by MS
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 4

5. Polybromodiphenylethers
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Target analytes:
PAH
Polybromodiphenylethers
Every other priority pollutant analysed by labs
Matrices:
Water and whole water
SPM by filtration or centrifugation
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 5

6. Discussion for preparation of future events
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Belgium (ISSEP + VMM), Czech Republic, Estonia, Germany (HH, BW, NRW, THG + BFG), Ireland (IWW), Italy (I.S.P.R.A. + IRSA), Latvia, Netherlands, Slovak Republic, Spain (IDAEA),
Discussion for preparation of future events
Results reporting deadline
Contact:
Georg Hanke, JRC IES
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 6

7. DISCUSSION ON PAST CMA EXERCISES
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
DISCUSSION ON PAST CMA EXERCISES
The initial idea of the experiment was to get together on a single sampling site laboratories from all over the EU to share practical experiences, comparing also sampling procedures
Limitations in the present approach
CM on site experiments are not a proficiency test and the number of participants, each with their own method, is not often sufficient for a statistical assessment of the data
The need for a real reference value or reference laboratory
The need for an homogeneous sample
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 7

8. DISCUSSION ON PAST CMA EXERCISES
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
DISCUSSION ON PAST CMA EXERCISES
Need for a targeted elaboration of data collected in the last 3 trials
This elaboration should result in practical recommendations for the WFD monitoring
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 8

9. DISCUSSION ON FUTURE CMEP EXERCISES
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
DISCUSSION ON FUTURE CMEP EXERCISES
Proposal for targeting the next experiments to specific issues
Whole water analysis
SPM and sediment for hydrophobic compounds
Sampling
Lab and field blanks
New substances (problematic PS, new PS, emerging pollutants)
In some cases it could be a more specific and targeted experiment, which requires specialized labs and could not be addressed to all laboratories involved in routine WFD monitoring
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 9

10. OPEN ISSUES ON FUTURE CMEP EXERCISES
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
OPEN ISSUES ON FUTURE CMEP EXERCISES
Passive sampling:
Time averaged analysis: need for a different experimental set-up
There are already collaborative trials at national (e.g. France) and international (e.g. NORMAN) levels which could be integrarted in the CM on site program
Non target-screening:
Specific interlab study for selected specialised labs
Call for interest with a questionnary
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 10

11. Choice of experimental setup:
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
DISCUSSION :
Choice of substances:
Ask each MB to submit a list of priority 5 compounds which they consider useful to be analysed in the future CM on site experiments.
Choice of experimental setup:
Adapt the set up to specific target and issues or maintain the present approach which involves labs from all MS?
How to integrate on going interlab trials:
Can we give a sort of “CMEP label” to interlab trials useful for WFD monitoring?
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible. 11

12. THANK YOU FOR YOUR ATTENTION
Contacts:
Georg Hanke, JRC IES
Stefano Polesello, CNR-IRSA