Presentation is loading. Please wait.

Presentation is loading. Please wait.

Critical Design Review

Similar presentations


Presentation on theme: "Critical Design Review"— Presentation transcript:

1 Critical Design Review
JAKE BINNEY JAMEY GRAHAM LOUISE MARTINEZ JACK OAKES MARCUS RAHIMPOUR ERIN TUCKER 10/17/06

2 Justice League Satellite
Primary Mission The Primary Mission of the Justice League is to design, implement and evaluate an onboard drag driven generator with the ultimate goal to power onboard BalloonSat systems, replenish battery charge to extend payload operations, and reduce the need of high volume battery banks. 1/17/2019 Justice League Satellite

3 Justice League Satellite
Mission Successes Full Mission Success – Wind power generated during ascent is sufficient to fully power satellite during mission. Partial Mission Success - Wind power generated during ascent is limited, and will only power some functions. Minimal Mission Success – Wind power is generated during ascent. 1/17/2019 Justice League Satellite

4 Justice League Satellite
Design 17cm 10cm 27cm 10 cm 1/17/2019 Justice League Satellite

5 Justice League Satellite
Design (Cont.) Parts Foam Core Structure with Thermal Insulation HOBO Data Logger Thermal Gauge Fan with Rare Earth Magnets on Axle Copper Wire surrounding axle Battery Terminals Resistor Heater (with switch) 2 Cameras Timing Circuit (with switch) 1/17/2019 Justice League Satellite

6 Functional Block Diagram
1/17/2019 Justice League Satellite

7 Justice League Satellite
Management Person Tasks Marcus Rahimpour Budget Balancing Hardware Jake Binney Schematics PowerPoints Jack Oakes Mission Overview Mass Budget Jamey Graham Scheduling Building Process Erin Tucker Primary Mission Personal Info Louise Martinez Launch Logistics Safety 1/17/2019 Justice League Satellite

8 Justice League Satellite
Budgets Item unit mass(g) Magnets(8) 46.4 space blanket 12 2nd camera with battery and film 50 1st camera with battery, film, 555 timer 211 heater 28.2 9v 46.1 fan 62.6 copper pole 30.5cm length 8.7 FoamCore Structure 120 HOBO 51.2 Tin Sheet w/ pakaging 29.53 HOBO Cord 9.3 wire - 30 gg 20 Sum Mass 695.03 COSTS -Camera $60 -SD Card $50 -Infrared camera filter $50 -Copper Wire $5 -Space Blanket $1 -Magnets $24 -Transmission $2 -Transmission plate (where batteries go, attached to transmission in contact with the wire) $2 Sum= $194 1/17/2019 Justice League Satellite

9 Justice League Satellite
Testing Drop Test – Completed Box dropped from top of Coors Event Center Parking Structure. Survived with no physical damage and structure intact. Stair Pitch Test – Completed Box kicked down stairs in DLC. Survived with no physical damage and structure intact. 1/17/2019 Justice League Satellite

10 Justice League Satellite
Testing (Cont.) Wind Tunnel Test – Not Completed Will determine expected voltage inputs. Whip Test – Not Completed Will determine if structural integrity can withstand G-forces from balloon pop. Subsystem/Mission Simulation Test – Not Completed Will power systems within Balloonsat and test functionality and integration of hardware. Cold Test – Not Completed Will determine if hardware will survive Near-Space environment. 1/17/2019 Justice League Satellite

11 Drop Test, Stair Pitch Test: October 10th
1/17/2019 Justice League Satellite


Download ppt "Critical Design Review"

Similar presentations


Ads by Google