1. How to use remote control of chosen computer with application of Remote Administrator
Radoslaw Jedynak, PhD
Poland, Technical University of Radom
Faculty of Teacher Training
Department of Mathematics

2. Introduction
Remote control software is software used in remote administration to allow the use of computers or other hardware located in separate places. Its typical use is to control a computing server or desktop computer from another desktop computer .

3. Introduction
Remote control is used for network taking of the screen, the keyboard and the mouse of the controlled computer, where the remote control software implements these actions. The given function makes possible the simple management of the computers, installation from a distance, upgrading or the reconfiguration of programs in the net on the remote computer.

4. Popular programs
VNC
NetOp Remote Control
Remote Administrator

5. Radmin 3 - General Installation

6. Radmin 3 consists of two modules:
Radmin Server 3
The Server module needs to be installed on the remote computer (for example your office PC) that you want to access from your own one (for example your home PC or notebook).
Radmin Viewer3
The Client module (also called the Viewer) needs to be installed on the local computer (for example your home PC or notebook) which you want to use to access your remote PC.

7. Installing Radmin Server 3 - step 1
Download Radmin Server 3.3. Transfer the file: rserv33.exe onto the remote computer (the remote computer is the computer which you want to gain access to later via Radmin) and run (execute) rserv33.exe on the remote computer. Follow the on-screen instructions.

8. Installing Radmin Server 3 - step 2
Configure Radmin Server on the remote computer. Follow the on-screen instructions. 1 2 3 4
Add a user to the security system

9. Installing Radmin Server 3 - step 3
Configure Radmin Server Options on the remote computer. Follow the on-screen instructions.
The default port can be changed, which is used to connect to Radmin Server.

10. Installing Radmin Viewer 3 - step 1
Download Radmin Viewer 3.3. Transfer the file: rview33.exe onto the local computer (the local computer is the computer from which you connect to the remote computer) and run (execute) rview33.exe on the local computer. Follow the on-screen instructions.
Portable version of Radmin Viewer 3.3 can be downloaded which does not require installation.

11. Installing Radmin Viewer 3 - step 2
Run Radmin Viewer and create a new connection. Follow the on-screen instructions. 1 2 3
Enter the IP address of the computer on which you installed Radmin Server.
You can change any of the default connection settings

12. Connecting to a Remote Computer
Run Radmin Viewer and access to remote computer. Follow the on-screen instructions.
When using Full Control or View Only connection mode, you will see the remote computer desktop inside a window or as your full screen.
If you are connected in Full Control connection mode, you can control the remote desktop using your keyboard and mouse as if you were sitting in front of it.

13. Connecting to a Remote Computer
Run Radmin Viewer and access to remote computer. Follow the on-screen instructions.
When the computers are connected using telnet connection mode, Radmin will display the 'Telnet' window.
This window lets you issue commands and displays any responses.

14. Connecting to a Remote Computer
Run Radmin Viewer and access to remote computer. Follow the on-screen instructions.
When connected using File Transfer connection mode, Radmin will display the 'File Transfer' window .
This window lets you transfer files through an easy-to-use interface

15. Connecting to a Remote Computer
Run Radmin Viewer and access to remote computer. Follow the on-screen instructions.
Using shutdown connection mode you can power off, restart or log off the remote computer without needing to connect using Full Control mode.

16. Connecting to a Remote Computer
Run Radmin Viewer and access to remote computer. Follow the on-screen instructions.
Using shutdown connection mode you can power off, restart or log off the remote computer without needing to connect using Full Control mode.

17. Connecting to a Remote Computer
Run Radmin Viewer and access to remote computer. Follow the on-screen instructions.
Lets two or more users to communicate with each other using shared text messages.
Enables two or more users to communicate with each other using microphones and speakers.
When connected in 'Send message' mode you can send text messages to a remote computer. This message will appear on the remote computer in a pop-up window

18. Thank you for your attention