1. How to Access and Complete Training
Project Conference 2009
1/18/2019
Important: You must complete ALL of the following steps to have your training marked as complete in your training records.
How to Access and Complete Training
Using the Polaris Reliance tool
Revised: July 2017
Revision Number: 6
© 2010 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows Vista and other product names are or may be registered trademarks and/or trademarks in the U.S. and/or other countries.
The information herein is for informational purposes only and represents the current view of Microsoft Corporation as of the date of this presentation. Because Microsoft must respond to changing market conditions, it should not be interpreted to be a commitment on the part of Microsoft, and Microsoft cannot guarantee the accuracy of any information provided after the date of this presentation. MICROSOFT MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO THE INFORMATION IN THIS PRESENTATION.

2. How do I access the Training?
Select the link in the training communication notice. That link will take you to the Reliance Login.
Reliance Log In Appears
Supplier:
Login: Supplier Portal Login st time PW: polarisreliance
(You will be prompted to reset your password after the 1st login.)
1st Time Login Settings:
Select your Time Zone
Select your Locale means to Select your Language.
Recommend: English – no other languages currently available.
Contact with log in questions.

3. Notice of System Timeout –Important!
Due to security reasons, Reliance is set to timeout after 25 minutes of inactivity. This training course opens in a new window, clicking through the training does NOT count as Reliance activity. Therefore, you will see a timeout warning pop up while you are completing this training. Please click ‘OK’ to continue your Reliance session.
If you DO NOT click ‘OK’, you will not be able to complete the test and you will have to start the training over!

4. Training Landing Page in Reliance
The page you land on once signed into Reliance looks like this.
Scroll down to the “Take Test” Section
Select “Take Test” (This is navigating you to the training material that you need to review before taking the test.) OR
If you had already accessed the training, instead of the green “Take Test” button, you will have a pending test template link to select.
If you do not see the Take Test button, Subject: Reliance User Profile- Job Position Update Requested.
Take Test Navigates You To The Training Material

5. Training Material Link
In the External Training Material Section, Select the Link to access the training materials
The Training Material will open and you can select “START” to take the training course.
Training Title Will Be Here - (Not Completed)
This is where you access the training material & evaluation link

6. Training Title Will Be Here - (Completed)
At the end of the training
Exit training
Very important: you need to
complete the following steps to
mark the training as ‘Complete’.
Go back to Reliance Page
If you had a passing score (usually 70% or above) you will see the course marked as Completed.
You must then click on “Take Evaluation” button and complete the training evaluation.
Training Title Will Be Here - (Completed)
Your Feedback Is Important To Us!

7. Evaluation Submit Test & Evaluation
Your feedback is very important to us. Please complete the training evaluation for the applicable fields.
Once you complete the evaluation, scroll up to the top of the page and select the yellow “Completed” button.
Select the “Submit” button. And Answer “OK” on the message.
Submit Test & Evaluation

8. Results Training is Now Considered Complete.
Review Results in the Results Report Section.
Note: if you received a passing score (typically 70% or above) you will see a score of 100% and the word ‘PASS’.
Important: Until you see ‘PASS’ on your record, the training is considered incomplete.
You can now Exit the training.
Training is Now Considered Complete.

9. Verify Completed Training Status
To verify you have completed all the steps above:
Within the Training module
Go to ‘01. Person Profiles’
01. My Profile
Scroll down to the Requirement
Under Status you should see it marked ‘Complete’
2. Double click your name to open
Your Name
3. Go to Training Plan tab
Verify ‘Complete’ status to remain eligible to quote new business.