1. Problem 1 (20 points).
There are four circuit elements shown in Figure 1.
Use ALL FOUR circuit elements to construct a circuit in which the power absorbed by the 10 [W] resistor is 90 [W] and the power absorbed by the 50 [W] resistor is 450 [W]. Make sure that current goes through all elements (no dangling elements).
Show that total delivered power is equal to the total absorbed power in your circuit.
120 [V]
10 [W] + -
6 [A]
50 [W]

7. - R 2 vs 1 Problem #2 (15 points)
In the circuit shown in Figure 2, a voltmeter with internal resistance RM is used to measure the voltage between points 1 and 2. The voltmeter is built using a d’Arsonval meter movement.The measured voltage is equal to 0.5vs.
Find the value of RM.
Find the error of the measurement in %. + - R 1 2 vs