1. Internal Use Only – Do Not Distribute CONFIDENTIAL How to install Laminate or Formica on SmartBOARD?

2. Internal Use Only – Do Not Distribute CONFIDENTIAL Instruction for install Laminate on SmartBOARD Internal use only Install SmartBOARD 8 mm. thickness upper with C74 steel no.24 with 60 cm. interval. Install screw every 20 cm. each and minimal 1.2 cm. from SmartBOARD edge. 60 cm. SmartBOARD 8 mm. 20 cm.

3. Internal Use Only – Do Not Distribute CONFIDENTIAL Use trowel scratch screw head to be smooth then clean with damp clothes for dust free. Leave until dry. Instruction for install Laminate on SmartBOARD

4. Internal Use Only – Do Not Distribute CONFIDENTIAL Paste cover screw head and jointing with SCG SmartPlaster. Leave 3 hours before use paper sand paper polish. Then clean again with dry clothes. Instruction for install Laminate on SmartBOARD

5. Internal Use Only – Do Not Distribute CONFIDENTIAL - Painting with old cement primer then leave until dry. - Paste with rubber glue for Laminate or Formica ex. Herferin Brand Instruction for install Laminate on SmartBOARD

6. Internal Use Only – Do Not Distribute CONFIDENTIAL - Use trowel to spade glue behind Laminate and Formica and SmartBOARD surface. - Leave 10 minute then bring Laminate or Formica to cover on SmartBOARD surface. Instruction for install Laminate on SmartBOARD

7. Internal Use Only – Do Not Distribute CONFIDENTIAL Press Laminate or Formica with SmartBOARD. Use rubber hummer stress on Laminate or Formica edge and air gap for more smoothen. Instruction for install Laminate on SmartBOARD