1. Update primary numbers active part
Is the name really ?
I lost release 02.01
amdb_simrec.r.02.02:
Difference with amdb_simrec.r (ATL-CSC )‏
new 1 BIM with HV <-> RO inverted
new 6 BIR with HV <-> RO inverted + correction 75mm
BIS8 bad positioning
BML sector 13 add hole corresponding to elevator place > 12367
BOG bad positioning
BMF1,BMF2,BMF3 LB2->LB1
BOG1,BOG2,BOG4,BOG5 RPC size W PRC8, RPC17
BOS2,BOS3,BOF1->BOF >1853 (+3mm? should be checked)‏
BOS1 asymmetric CMI +803mm

2. Update primary numbers dead matter part
Maybe
02-01 was the version with only updates to active
geometry compared to ?
amdb_simrec.r.02.02:
saddle
Forward MDT support
Forward TGC support ?
Feet struts
ID patch panel 2
MDT BOL support
Tie rod
S13 passerel
Passerels
in GeoModel
R14 probable
> R14

4. amdb_simrec.r.01.01
Feet struts
amdb_simrec.r.02.02

5. Detector description parameters chain: present situation
Primary numbers
Oracle
GeoModel G4
AMDB
Active part
automatic-translation
Dead Matter
Reconstruction
18/01/2019

6. Work... validation of new set of primary numbers
simulation No body working on this!
reconstruction No body working on this!
Graphical tool to debug GeoModel (find automatically clashes)‏
converter GeoModel Object to XML file to use Persint clashes tool O.Fedin 10%
Simulation in the spectrometer (avoid G4 clashes):
G4 expert to test boolean + brep's: time consuming + physics T.Nikitina 10%
Converter Primary numbers to GeoModel on fly: No body working on this!
easy dead matter update
present solution is a dead end
need to have somebody to check the objects weight in GeoModel/G4 w.r.t the reality No body working on this!
ex: barrel coil in reality~90 tons and in G4?
Tomograph informations to Primary Numbers P.Schune 10%‏
Geometers' informations: Nobody working on this!
absolutely needed for alignment and magnetic field reconstruction!

7. Active part: MuonGeoModel updates and plans for 14.x.x
Provide XxxDetectorElements with granularity of Data Collections
allows muon code optimization (mainly timing in data access !) useful not critical
big project (but details of the implementation are under control):
XxxDetectorElements inherit from the TrkDetElementBase ( provide all generic tracking interfaces + technology specific methods)
hold short arrays of “current” XxxReadoutElements and delegate to them the real work
the plan: deliver the functionality for in MuonGeoModel, while keeping existing interfaces for clients
Realistic effects: A/B-lines, wire sag need to be there for real data
B-lines:
handled in the new convention (Sept 2007) in 13.x.0
physical validation (against AMDC implementation) to come for FDR2
provide access to deformation parameters from the cond. DB for FDR2
A-lines prove to be able to read them from COOL in simulation – hopefully in a few days
wire sag is already addressed on the side of MuonGeoModel + MuonDigitization
some design optimization is possible – not critical – can come after release 14

8. Active part: MuonGeoModel updates and plans for 14.x.x
Clashes in the active, active-dead sector
clashes seem not to be a major problem now:
the usual few (!) known do not cause job crashes – at current default simulation parameters
automatic cutouts still to be introduced not critical No defined time scale yet
Validation
Check-fix small inconsistencies of active sector in MuonGeoModel vs Amdc
not critical (~10 microns)
Memory vs cpu-time
caching can be turned on/off - cache can be built at initialization already in
Range Checks
methods to check validity of identifiers based on the detector element they are associated with already in
used in MuonXxxRdoToPrepData (Xxx = Mdt, Rpc, Csc) already in
identifiers (from rdo decoding / cabling) inconsistent with geometry layout do not produce prd

9. Man Power (1)‏ Primary numbers update nobody: Tomograph data LC
Software to update Oracle DB : Active part
JF.Laporte,V.Tsulaia
Software to update Oracle DB : Dead matter part
JF.Laporte,A.Barashkou,LC
GeoModel Active part
S.Spagnolo, V.Tsulaia
GeoModel Dead matter part
A.Barashkou
Validation Primary numbers to Oracle / GeoModel: Active part
JF.Laporte & S.Spagnolo
Validation Primary numbers to GeoModel/G4: Dead matter part
nobody:
Global validation G4
Global validation reconstruction
18/01/2019

10. Total FTE : 1.00 !!!! Man Power (3) A.Barashkou 30 % JF.Laporte 10 %
Today
A.Barashkou %
JF.Laporte %
S.Spagnolo %
V.Tsulaia %
L.Chevalier %
Total FTE : 1.00 !!!!
~ parameters
~7000 m2 chambers
~1000 tons of dead matter
18/01/2019

11. Summary Release 14 update amdb active part
Station position corrections from the drawings
A lines will correct these numbers (even it is the huge correction ~10mm)‏
missing big dead matter parts:
saddle , MDT supports, Tie rod, pp2 (only 1 over 12)‏
already in amdb need to put in GeoModel
Proceeds through the “old” way for R14: dead end
Automatic xml  GeoModel converter is mandatory
missing big dead matter part not yet in amdb:
16 vacuum pumps, brackets, eta=0 services, passerel support,
Permanent MDT chamber construction defects not yet before R15
From Tomograph and cosmics analysis
need to have somebody to check the objects weight in GeoModel/G4 w.r.t the reality
ex: barrel coil in reality~90 tons and in G4?

12. VALIDATION Summary Release 14 1/ update amdb active part
Station position corrections from the drawings (completed in the next days)
2/ missing big dead matter parts:
saddle , MDT supports, Tie rod, pp2 (only 1 over 12)‏
already in amdb need to put in GeoModel
Proceeds through the “old” way for R14
Automatic xml  GeoModel converter for R15
missing big dead matter part NOT yet in amdb:
TGC supports, eta=0 services, return flux disk: A rough model which can account for the total amount of matter can be provided for R14
MDT barrel chamber support brackets, vacuum pump: R15
3/ Permanent MDT chamber construction defects not yet before R15
From Tomograph and cosmics analysis
Remarks: need to have somebody to check the objects weight in GeoModel/G4 w.r.t the reality
ex: barrel coil in reality~90 tons and in G4?
VALIDATION

13. Wrong place in GeoModel/G4
Good place in Primary numbers

14. 18/01/2019

15. 18/01/2019

16. Backup slides
18/01/2019

17. 18/01/2019