1. Contents Capability-PCB Capability-FPC and RFPC
Capability-Aluminum PCB
Capability-PCBA
Wonderful PCB

2. Capability –PCB General Capability
Number of Layer: Layer
Maximum processing area: x 1000 mm
Min board Thickness:
2 Layer mm(12mil)； Layer mm(16mil)；
6 Layer mm(32mil)； Layer mm(40mil)；
10 Layer 1.1mm(44mil)； Layer mm(52mil)；
14 Layer 1.5mm(59mil)； Layer mm(63mil)；
18 Layer 1.8mm(71mil)；
Finished board thickness tolerance:
Thickness＜0.8mm，Tolerance:+/-0.08mm；
0.8mm≤Thickness≤6.5mm，Tolerance+/-10%
Wonderful PCB

3. Capability -- PCB General Capability
Twisting and bending ：≤0.75%，Min0.5%。
Range of TG： ℃
Impedance tolerance+/-10%，Min+/-5%。
Hi-Pot Test: Max4000V/10MA/60S
Surface treatment:
HASL With Lead HASL Free Lead
Flash Gold Immersion Gold
Immersion Silver Immersion Tin
Gold Finger Osp
Wonderful PCB

4. Capability -- PCB Pattern limit
Min width
0.1mm (4 mil)
Min trace
Min width of ring (inner layer)
0.15mm (6 mil)
Min width of ring (out layer)
Min solder bridge
0.1mm (4 mil)
Min height of legend
0.7mm (28mil)
Min width of legend
Wonderful PCB

5. Capability -- PCB Holes processing
Final hole size
Min 0.2mm
Drilling hole size
0.20~6.5mm
Drilling tolerance
+/-0.05mm
Final hole size tolerance (PTH)
φ0.20~1.60mm+/-0.075mm
φ1.60~6.30mm: +/-0.10mm
Final hole size tolerance (NPTH)
φ0.20~1.60mm+/-0.05mm
φ1.60~6.50mm: +/-0.05mm
Drilling strip hole
Length /width 2:1
Min strip hole width 0.65mm
Length & width tolerance +/-0.05mm
board thickness/hole size
≤ 10:1
Wonderful PCB

6. Capability -- PCB Cu thickness +plating (1)
Out layer Cu thickness:1-6OZ
Inner layer Cu thickness:0.5-4OZ
Cu thickness of PTH: average>=20um,Min.>=18um
HASL with lead: Tin 63% Lead37%
HASL free lead:
surface thickness>=0075um
Thickness in the hole>=5um
Flash Gold
Ni thickness:3-5um (120u"-160u")
Gold thickness: um （1u"-3u"）
Wonderful PCB

7. Capability -- PCB Cu thickness +plating (2)
Immersion Gold
Ni thickness:3-5um (120u"-160u")
Gold thickness: um （1u"-6u"）
Immersion Tin
Tin thickness: um （32u"-48u"）
Immersion silver
Ag thickness:0.15um-0.75um (6u"-30u")
Gold Finger
Ni thickness:3-5um （120u"-160u"）
Gold thickness: um （1u"-60u"）
Wonderful PCB

8. Capability -- PCB Cover thickness (1)
Solder mask
Color: green, matte green,yellow,blue,red,black,matte black
Solder mask thickness:
Surface line≥10um，
surface line corner≥6um
surface board 10-25um
Solder mask bridge width: HOZ≥0.1mm IOZ≥0.12mm
Legend
Color: White, yellow, black
Min height of legend mm (28mil)；
Min width of legend mm (6 mil)
Wonderful PCB

9. Capability -- PCB Cover thickness (2)
Blue Gel
thickness: mm
tolerance+/-0.15mm
Carbon print:
Thickness:5-25um
Min space：0.25mm
impedance:200Ω
Wonderful PCB

10. Capability -FPC FPC Layers 1-8 layers Board Thickness 0.05-0.5mm
Min.line width/space 0.04/0.04mm
in.Through Hole Size 0.2mm
PTH Hole Dia.Tolerance ∮≤0.1mm 0.05mm ∮≥0.1mm ±0.075mm
Solder Mask Registration Tolerance ±0.05mm Min.Routing Dimension Tolerance ±0.05mm
Hole to edge（Hard tool/Die Cut) ±0.1/±0.2mm
Eege to Edge（Hard tool/Die Cut) ±0.05/±0.2mm
Circuit to edge（Hard tool/Die Cut) ±0.07/±0.2mm
Wonderful PCB

11. Capability-Flex Rigid PCB
4L1R+2F+1R
6L2R+2F+2R
1+HDI 6L1+1R+2F+1R+1
2+HDI 6L1+1F+2F+1F+1
2+HDI 8L
Thin 4L R-F（1+HDI ）
Wonderful PCB

12. Capability—FPC and RFPC Material-1
1. Base Material
1.1 FCCL ( Flexible Copper Clad laminate)
Polyimide: Kapton ( m/20 m/25 m/50 m/75 m
High flex life, good thermal management, high moisture absorption and good tear resistant
Polyester (25 m/50 m/75 m)
Most cost effective, good flex life, low thermal resistivity, low moisture absorption and tear resistant
1.2 Dielectric Substrates：PI, PET.
Wonderful PCB

13. Capability—FPC and RFPC Material
2. Coverlay
2.1 Cover Layer from ½ mil to 5 mils (12.7 to 127µm)
Polyimide: (12.5 m/15 m/25m/50m/75m/125m)
High flex life, high thermal resistivity.
2.2 Flexible Solder Mask
Most cost effective, lower flex life, better for registration )
2.3 PIC—photo imaging covercoat
Lower flex life, better for registration
Wonderful PCB

14. Capability—FPC and RFPC Material
3. Adhesive Sheet
4. Conductive Layer
4.1 Rolled Annealed Copper (9 m/12 m/17.5 m/35 m/70 m)
High flex life, good forming characteristics.
4.2 Electrodeposited Copper (17.5 m/35 m/70 m)
More cost effective
4.3 Silver Ink
Most cost effective, poor electrical characteristics. Most often used as shielding or to make connections between copper layers
SF-PC5000 and SF-PC1000 protection film
Wonderful PCB

15. Capability—FPC and RFPC Material
6.Additional Material & Stiffeners
FR4——Epoxy
Pressure Sensitive Adhesive (PSA)　
Steel, Aluminum stiffeners
7. No / Low Flow PP
Applied in Lamination
106(2mil)
1080(3.0mil / 3.5mil)
2116(5.6mil) w/o micro-via
Brand: TUC, Panasonic, Arlon, Hitachi, Doosan
Wonderful PCB

16. Capability –Aluminum PCB
Wonderful PCB

17. Capability- PCB Assembly
1. PCBA, PCB assembly: SMT & PTH & BGA 1.1.SMD :160K points/hour. operation rate :70%( 8 working hours per day, 20 set equipments) 1.2.DIP: 75K points/hour. operation rate :80% ( 8 working hours per day, 250 persons for DIP) 2. PCBA and enclosure design 3. Components sourcing and purchasing 4. Quick prototyping 5. Final assembly 6. Test: AOI, In-Circuit Test (ICT), Functional Test (FCT) 7. Custom clearance for material importing and product exporting
Wonderful PCB

18. Capability –Profiling for all
cnc : tolerance+/-0.1mm
line to cnc ≥0.20mm
hole to cnc ≥0.30mm
gold finger to cnc ≥0.20mm
Punching: Hole size diameter +/-0.10mm
Punching diameter +/-0.15mm
v-cut: corner：30℃、45℃、60℃
corner tolerance：+/-5°
v-cut deepness： mm
deepness tolerance：+/-0.10mm
Wonderful PCB

19. Capability –Test for all
Equipment:
Universal Tester
Flying Probe Open/Short Tester
High power Microscope
Solderability Testing Kit
Peel Strength tester
High Volt Open & Short tester
Cross Section Molding Kit With Polisher
Wonderful PCB