Download presentation
Presentation is loading. Please wait.
Published byStone Rawe Modified over 10 years ago
2
15 £1 Million 14 £500, 000 13 £250,000 12 125,000 11 £64,000 10 £32,000 9 £16,000 8 £8,000 7 £4,000 6 £2,000 5 £1,000 4 £500 3 £300 2 £200 1 £100
3
A:B: £100 Which alloy is made from copper and zinc? C:D: 50:50 Brass PewterAluminium Bronze
4
Excellent!Excellent!
5
Unlucky!Unlucky! Maybe some homework is needed!
6
A:B: AluminiumMild steel £200 Which of the following metals is non-ferrous? C:D: Stainless steel Cast iron 50:50
7
Excellent!Excellent!
8
SorrySorry How basic is that?
9
£300 Galvanising uses which metal as a coating? C:D: 50:50 A:B: Zinc ChromiumTin Copper
10
FantasticFantastic
11
Oh dear! Thats such an easy one to send you home!
12
A:B: Malleability Elasticity £500 The property of a metal to be easily pressed, spread and hammered is called what? 50:50 C:D: DuctilityHardness
13
BrilliantBrilliant
14
SorrySorry Thats a difficult one!
15
£1,000 Rust is a major problem for which of these metals? A:B: Stainless steel Mild steel 50:50 C:D: BrassCopper
16
Well done!
17
Unlucky!Unlucky! You should have read the revision guide!
18
A:B: ToughnessHardness £2,000 The property of metals to resist breaking, bending or deforming is called what? C:D: Tensile strength Compressive strength 50:50
19
Super!Super!
20
Oh no! Thats a tricky one!
21
A:B: Kryptonite Bauxite £4,000 Where does Aluminium comes from? C:D: Aluminite Zirconite 50:50 Bauxite
22
Very good!
23
IncorrectIncorrect So near and yet so far!
24
A:B: Soft solderingGas welding £8,000 The process of brazing fits into which family of processes? C:D: Hard soldering Spot welding 50:50
25
Very good!
26
Sorry!Sorry! That isnt the answer
27
A:B: RouterSpindle moulder £16,000 The process of turning metals is done on what machine? C:D: Milling machine Centre lathe 50:50
28
Very good!
29
UnluckyUnlucky But a bit more reading is needed!
30
Digestion A:B: Aluminium £32,000 Anodising is a process for which metal? Copper 50:50 C:D: Stainless steel Chromium
31
Brilliant!Brilliant!
32
Unfortunately…Unfortunately… Thats not the correct answer
33
A:B: HardeningTempering £64,000 Annealing is a form of heat treatment to do what to metals? C:D: SofteningToughening 50:50
34
Well done!
35
Im sorry it looked so easy!
36
A:B: 0.5%1.5% £125,000 What percentage of carbon would you usually find in tool steel? C:D: 5%3.5% 50:50
37
Very good!
38
IncorrectIncorrect You should have got that one!
39
£250,000 Which alloy is made up of mainly tin and very small amounts on antimony and copper? A:B: PewterGuilding metal C:D: Casting alloy Tinplate 50:50
40
Excellent!Excellent!
41
Wrong Choice! Thats sad after such a good run!
42
A:B: Compression moulding Pressing £500,000 What process is used to form car body panels from sheet steel? C:D: ExtrudingDrop forging 50:50
43
Very Good!
44
Sorry!Sorry! Thats so close!
45
A:B: £ 1,000,000 High speed steel contains a high content of tungsten and two other metals. Which two? C:D: Chromium and vanadium Chromium and magnesium Nickel and magnesium Magnesium and vanadium 50:50
46
You are a Winner!
47
UnluckyUnlucky You were very nearly a millionaire!
49
A:B: £100 Which alloy is made from copper and zinc? C:D: 50:50 Brass Bronze
50
A:B: Aluminium £200 Which of the following metals is non-ferrous? C:D: Stainless steel 50:50
51
£300 Galvanising uses which metal as a coating? C:D: A:B: Zinc Chromium 50:50
52
A:B: Malleability £500 The property of a metal to be easily pressed, spread and hammered is called what? C:D: Ductility 50:50
53
£1,000 Rust is a major problem for which of these metals? A:B: Stainless steel Mild steel C:D: 50:50
54
A:B: ToughnessHardness £2,000 The property of metals to resist breaking, bending or deforming is called what? C:D: 50:50
55
A:B: £4,000 Where does Aluminium comes from? C:D: Aluminite 50:50 Bauxite
56
A:B: Gas welding £8,000 The process of brazing fits into which family of processes? C:D: Hard soldering 50:50
57
A:B: Spindle moulder £16,000 The process of turning metals is done on what machine? C:D: Centre lathe 50:50
58
Digestion A:B: Aluminium £32,000 Anodising is a process for which metal? C:D: Chromium 50:50
59
A:B: Tempering £64,000 Annealing is a form of heat treatment to do what to metals? C:D: Softening 50:50
60
A:B: 1.5% £125,000 What percentage of carbon would you usually find in tool steel? C:D: 3.5% 50:50
61
£250,000 Which alloy is made up of mainly tin and very small amounts on antimony and copper? A:B: Pewter C:D: Casting alloy 50:50
62
A:B: Compression moulding Pressing £500,000 What process is used to form car body panels from sheet steel? C:D: 50:50
63
A:B: £ 1,000,000 High speed steel contains a high content of tungsten and two other metals. Which two? C:D: Chromium and vanadium Nickel and magnesium 50:50
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.