1. LLC «Severstal-Gonvarri-Kaluga»

2. SEVERSTAL–GONVARRI–KALUGA PLANNING
First cut 23.06
First pack 19.07
First cut 18.10

3. GENERAL INFORMATION Start of the project 2 quarter 2009
Put in the operation 3 quarter 2010
Investment in the non-current assets 30 million Euros
Production capacity is about tons per year
Quantity of job positions: 50

4. LAYOUT STEEL SERVICE CENTER SGK

5. ITINERARY FOR FACTORY TOUR
Slitting Line 3
Cut to length 2 1
Blanking Line
Entry from GSK

6. EQUIPMENT
1 Blanking Line
1 Cut to Length Line
1 Slitting Line

7. BLANKING LINE
It’s a cutting line that process irregular shapes. Using a specific tool, forms can be adapted to the final shape of the part.
Technical capabilities
Input coil:
The thickness of the rolled metal: 0,6 - 3 mm
Coil width: mm
Internal diameter of the coil: mm
Outer diameter of the coil: mm
Maximum coil weight: 30 tons
Output blanks:
Maximum size of formats: 850x4000 mm
The minimum size of formats : 200x200 mm
Uncoiling maximum speed 90 m/min
Feeding maximum speed 120 m/min
Ability to provide accuracy along the length of ± 0,1 mm

8. SLITTING LINE Technical capabilities Input coil:
The thickness of the rolled metal: 0,8 – 6 mm
Coil width: mm
Internal diameter of the coil: mm
Outer diameter of the coil l: 900 – 2100 mm
Maximum coil weight: 32 tons
Output coil:
Internal diameter: mm
Maximum outer diameter: 2100 mm
Maximum weight: 32 tons
Minimum strip width 30 mm (depending on the thickness of rolled metal)
Maximum processing speed 300 m/min
Ability to provide accuracy along the width of ± 0,5 mm

9. CUT TO LENGTH LINE Technical capabilities Input coil:
The thickness of the rolled metal: 0,5 – 3 мм
Coil width: mm
Internal diameter of the coil: mm
Outer diameter of coil: 900–2100 mm
Maximum coil weight: 30 tons
Output parameters of sheets:
Maximum sheet length: mm
Minimum sheet length: 200 mm
Maximum weight stack: 10 tons
Maximum processing speed 90 m/min
Ability to provide accuracy along the length of ± 0,5 mm