1. Stand-Alone Systems / Occupancy Sensors

2. Timeline Service Reliability Integrity 1960’s 1970’s 1980’s 1990’s
Today
Incorporated in 1962 as a reseller of Panasonic Components
Introduced Douglas branded control components
Introduced Panasonic’s full 2Way System
Introduced Dialog – the first system with 2 wire dual tech occupancy & vacancy sensors
Introduced Diversa Occupancy / Vacancy Sensors
Introduced pre-assembled lighting control systems
Introduced computer based lighting controls
Introduced integral web server in lighting control system
Acquired by Panasonic Lighting Americas, Inc.
Introduced industry leading Room Control Panels & Wireless Control systems
Service
Best-in-Class Pre-Sales, Quote & Design.
Exceptional Post-Sales Site & Technical Support
Reliability
100% Project Quality Control
Industry Best Practices for Design & Testing
Integrity
Over 50 years of proven experience
Unwavering commitment to successful outcomes

3. Product Families Dialog® Centralized Control Systems
Dialog® Room Controller
Distributed Control Systems
Diversa® Stand-Alone Systems
Douglas Lighting Controls® Bluetooth® Wireless Solutions

4. Common Applications
Education
Retail
Commercial
Healthcare
Government
Sports Venues
1,300,000+ relay control points active in the field today
1,500 projects designed, installed, & commissioned annually (42,000 lifetime)

5. General Common to all Diversa Series Sensors
Choice of line voltage or low voltage sensors
PIR for base sensing technology
ADI-Voice for secondary sensing technology
Diode pulse technology
Low power draw

6. Ceiling Sensors WOR Series Sensors
Extremely low profile (22mm or .88”)
Optional lenses (Standard, Extended, High Bay)
Single pole & 2-pole versions available
Adjustable tilting lens
Integral photo sensing available (1- or 2-pole)
Additional options/features:
Auxiliary relay
0-10v Dimming

7. Wall Switch Sensors WOS Series Sensors
Single pole & 2-pole versions available
Integral photo sensing available (1- or 2-pole)
Standard vandal proof lens
Additional options/features:
Auxiliary relay
0-10v Dimming

8. Wall/Corner Mount Sensors
WOW Series Sensors
Lens range options
Corner: 90ᴼ coverage, 7-15 ft mounting height, 70 ft range
Large Area: 130ᴼ coverage, 7-15 mounting height, 60 ft range
Single pole and 2-pole versions available
Integral photo sensing available (1- or 2-pole)
Additional options/features:
Auxiliary relay
0-10v Dimming

9. Power Packs Designed for use with Douglas low voltage switches
Acts like transformer to supply power to switches and sensors
Single pole or 2-pole Versions Available
Universal Voltage or 347V

10. Room in a Box Solution Floor Plan View Schematic View Functions
Vacancy Sensing for 277VAC Lights (Manual ON, Auto OFF)
Occupancy Sensing for 120VAC Plugs (Auto ON, Auto OFF)
Automatic Daylight Dimming and/or Switching
Manual Dimming and Switching
Auxiliary Relay on Sensor to Trigger HVAC
Demand response ready via sensor link
Room in a Box Advantages
Each room packaged in individual box
Factory programmed to provide occupancy control of receptacles and vacancy control of lights
Single SKU for entire room (DIVT24RC)
Install and Control – works out of the box

11. Infra-Red Setting Unit
For use with ALL Diversa Sensors (Line & Low Voltage and Dialog)
iR programming of virtually all available settings
Gives access to wider range of configuration possibilities
Can be used to ‘swap’ poles on 2-pole sensors and power packs
Uses standard AA batteries

12. Competitive Advantages
Accurate Detection Intelligence (ADI)
Accurately recognizes human occupancy
Eliminates false triggers from HVAC, Music, Vibration, Traffic
Smart Sensing
After OFF signal Diversa sensors will turn the lights back ON if motion or voice pattern is detected; even if sensor is programmed into Vacancy Mode.
Active for a variable period of time after each OFF event
Adjusts automatically
Long vacancy mode
If no PIR is detected after 2 hours then the lights will shut OFF, regardless of voice detection.
Walk-through mode
If no PIR is detected after the initial 30 seconds then the lights will shut OFF, regardless of the time-out setting
Dual Methods of Programming
Manual DIP Switches and Rotary Dials
Good for initial settings
IR Setting Unit
Allows for wider range of configuration properties
Added convenience & considerable time savings
Diode Pulse Power Pack
Diversa power packs act like Douglas relays and therefore can be controlled by any Douglas hardwired switch.
This creates a simple and affordable Vacancy Sensing solution.
A standard low voltage sensor is set to Vacancy mode
A standard power pack is used to switch the lighting load(s)
A standard hardwired switch is used to manually switch lights ON/OFF as desired

13. Additional Control Features & Options
Additional Features
Additional Control Features & Options
• Sensor Link • Alternating Contacts (2-pole)
• Photo Sensing • Programmable Power Pack Contacts
• 0-10v Dimming • Multi-Level Photo Sensing (2-Pole)
• Manual Switching • Low Temperature & High Humidity
• Self Adapting Technology • Adjustable Tilting Lens
Alternating Contacts (2-pole): 2-pole ceiling sensors can be programmed to alternate which lights automatically turn ON upon occupancy.
Sensor Link: Sensor Link is a connection which facilitates communication between low voltage sensors. The sensor link (orange wire) allows multiple sensors to coordinate their signals and act together as a cohesive zone.
Automatic “Walk-Through Mode”: The lights will turn off after 3 minutes if no detection occurs in the first 30 seconds of occupancy, regardless of the vacancy timeout setting.
Self Adapting Technology: The Automatic Mode uses a new sophisticated algorithm that tracks tendencies and adjusts operation to maximize energy savings.
Photo Sensing (-P): Photo-switching control can be enabled or disabled. When enabled, occupancy alone will not trigger the output state to ON. If occupancy is detected AND there is a deficiency of natural light (as determined by a programmable set point), the output is triggered ON. Once ON, the output remains ON until a vacancy condition is determined by expiration of the vacancy timer. An increase in natural light will not force the lights OFF.
Multi-Level Photo Sensing (2-Pole): Photo sensing on a 2-pole sensor can be configured to either restrict both poles or the primary pole only; If set to “Primary Pole Only”, the secondary pole will trigger based on occupancy, regardless of the photo setting.
Manual Switching: The WOR Sensor is equipped with a front panel button for the purpose of manually overriding the occupancy and/or photo controlled outputs. This allows for immediate testing of a sensor to verify installation.
Low Temperature & High Humidity (-L): This feature allows the device to be installed in such areas a Parking Garages and Refrigerated Warehouse. By utilizing PCB conformal coating, the device is designed to operate in environments that have condensing moisture and operation at temperatures as low as -40°C.

14. Thank you for your time today!
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Panasonic is under license.
Other trademarks and trade names are those of their respective owners.