1. Cladding panels

2. Bicycle shelter clad with perforated pre galvanised panels. The perforated sheet acts as a wind and rain screen. (9.5mm round holes 14.2mm staggered pitch in 2mm thick material)

4. Perforated & framed hot dipped galvanised steel painted balcony dividers (9.5mm round holes 14.2mm staggered pitch in 3mm thick material)

5. Low open area perforated mild steel galvanised & powder coated balcony screens (9.5mm round holes with 24.59 staggered pitch)

6. Perforated pre galvanised and powder coated cladding for a gate (13mm round holes 19mm staggered pitch in 2mm thick material)

7. Perforated galvanised & painted cladding for gate (12.7mm round 19mm staggered pitch in 3mm thick material

8. Perforated aluminium cladding on a pedestrian bridge. The primary purpose of the perforated sheet in this application was to stop people throwing things onto the trains below. (20mm round holes with 30mm staggered pitch 4mm thick material)

10. Perforated pre galvanised & powder coated bin enclosure (20mm round holes 30mm staggered pitch in 3mm thick material)

11. Perforated lift shaft cladding with a clear powder lacquer finish (9.5mm round holes 14.2mm staggered pitch in 2mm thick material)

12. Perforated pre galvanised & powder coated cricket ball screen (6.35mm round holes 9.5mm staggered pitch in 2mm thick material)

13. High open area perforated pre galvanised & powder coated perforated sheet 3mm round with 4mm staggered pitch

14. Perforated 316 quality stainless steel & woven mesh cladding panels

16. Woven mesh cladding and ventilation panels (80mm mesh in 12mm high tensile wire hot dipped galvanised & powder coated)

17. Woven mesh cladding and ventilation panels (80mm mesh in 12mm high tensile wire hot dipped galvanised & powder coated

18. Woven mesh ventilation and cladding panels 16mm mesh in 5mm wire

19. Galvanised woven mesh ventilation & cladding panels 50mm mesh in 8mm wire