1. info@verpa-senco.com www.verpa-senco.com Product Information Presentation

2. info@verpa-senco.com www.verpa-senco.com General information What fastener to use in what concrete: 2 Thickness of Material + Penetration Depth = Fastener Length

3. info@verpa-senco.com www.verpa-senco.com Cubical pressure Cube of 150x150x150 mm Tested until it breaks to meausure strength 2nd number in the concrete class C16/20 A cube is stronger than a cilinder, there for a smaller object is used. 3

4. info@verpa-senco.com www.verpa-senco.com Cylindrical pressure Cilinder of 150x300 mm Tested until it breaks to meausure strength 1st number in the concrete class C16/20 A cylinder is weaker than a cube. 4

5. info@verpa-senco.com www.verpa-senco.com What fastener to use in what concrete In steel structure beams (max 650 N/mm2): always use premium pins. Max penetration depth = 6.5 mm 5 Thickness of Material (Examples) Concrete Class Recommended Penetration Depth1mm Steel Stud3mm Steel Stud10mm Wood C16/2025-28mm25 / 323238 C20/2520-22mm222532 C25/3015-20mm1919 / 2225 / 32 C30/3715-18mm1919 / 2225 C40/5013-16mm1519 / 2225 C50/6012-15mm15 22 / 25 Premium pins advised

6. info@verpa-senco.com www.verpa-senco.com Fastener range various concrete classes 6

7. info@verpa-senco.com www.verpa-senco.com 7

8. On site concreting can lead to more pebble-stones on the bottom than on the top side. In such a case, on the ceiling side you need premium pins while on the floor side to can use regular pins. 8

9. info@verpa-senco.com www.verpa-senco.com 9 In soft concrete the scoring rate is high. A normal pin is advised. In hard concrete the nail can either bent or deform. This has an influance on the scoring rate. Therefor the premium pin is advised for usage in hard concrete.

10. info@verpa-senco.com www.verpa-senco.com SAP40XP Steel/Concrete Pinner 8 bar! Unique tool in the market Lightweight Trigger- and bottomfire Long thin nose 7 nail lengths Normal and premium 10 Net weight:3,2 kg Nail capacity:42 pins Drive power:90 J Operating press.:5,5 – 8,3 bar Fastener range:Collated pins Diameter:2,6 – 3,0 mm Fastener length:15 – 40 mm Net weight:3,2 kg Nail capacity:42 pins Drive power:90 J Operating press.:5,5 – 8,3 bar Fastener range:Collated pins Diameter:2,6 – 3,0 mm Fastener length:15 – 40 mm

11. info@verpa-senco.com www.verpa-senco.com SGP40 Steel/Concrete Pinner Cordless convenience Comfort grip Long thin nose 7 nail lengths Normal and Premium High voltage ignition 11 Net weight:4 kg Nail capacity:42 pins Drive power:90 J Drive time:2 shots/second Battery capacity:5200 shots Fastener range:Collated pins Diameter:2,6 – 3,0 mm Fastener length:15 – 40 mm Fuel cell:GC0012 Net weight:4 kg Nail capacity:42 pins Drive power:90 J Drive time:2 shots/second Battery capacity:5200 shots Fastener range:Collated pins Diameter:2,6 – 3,0 mm Fastener length:15 – 40 mm Fuel cell:GC0012

12. info@verpa-senco.com www.verpa-senco.com SGP40S (2 nd generation): Short Magazine (22 pins fitting the magazine) Block Out System Magazine Quick Release Depth of Drive Control FIRST toolless step free DOD Control on a Concrete Pinner Easy-Nail-Clear Magazine Magazine Quick Release Optional long magazine 12 Net weight:3,9 kg Nail capacity:22 pins Drive power:90 J Drive time:2 shots/second Battery capacity:5200 shots Fastener range:Collated pins Diameter:2,6 – 3,0 mm Fastener length:15 – 40 mm Fuel cell:GC0012 Net weight:3,9 kg Nail capacity:22 pins Drive power:90 J Drive time:2 shots/second Battery capacity:5200 shots Fastener range:Collated pins Diameter:2,6 – 3,0 mm Fastener length:15 – 40 mm Fuel cell:GC0012

13. info@verpa-senco.com www.verpa-senco.com Regular concrete pins 7 nail lengths (15, 19, 22, 25, 32, 38, 40 mm) 5 micron zinc, like nails Premium pins (Hardened pins for hard concrete) 7 nail lengths (15, 19, 22, 25, 32, 38, 40 mm) 5 micron zinc, like nails 13

14. info@verpa-senco.com www.verpa-senco.com Fuel cells Single cell GC0012 1.300 shots, 80 ml Premium fuel cell PC1274 1.300 shots, 80 ml, works from -15°C 14

15. info@verpa-senco.com www.verpa-senco.com Fuel cells Blisterpack PC1254 750 shots, 2x40 ml + adaptor 15

16. info@verpa-senco.com www.verpa-senco.com Car adaptor PC1196 12V for charging you batteries in the car Gas tool cleaning kit For keeping your tool in perfect condition 16

17. info@verpa-senco.com www.verpa-senco.com 17 There is no specific standard for concrete fixing. Only test certificates of competetion exist.

18. info@verpa-senco.com www.verpa-senco.com 18

19. info@verpa-senco.com www.verpa-senco.com 19 Overview Senco concrete pins as an alternative for Paslode: SENCO PINSPASLODE PINS -C6 Regular PinsSC6 Premium PinsHC6

20. info@verpa-senco.com www.verpa-senco.com 20 Metal(stud) on steel

21. info@verpa-senco.com www.verpa-senco.com 21 Metal on steel

22. info@verpa-senco.com www.verpa-senco.com 22 Wood on concrete In concrete minimum distance from the edge is > 76,2 mm. Minimum distance between nails > 102 mm.

23. info@verpa-senco.com www.verpa-senco.com 23 Metal(stud) on concrete

24. info@verpa-senco.com www.verpa-senco.com 24 Metal on stone

25. info@verpa-senco.com www.verpa-senco.com For fastening single shot attachements Pins can fix several attachements like: Washers Metal clips Plastic clips Perfo band 25

26. info@verpa-senco.com www.verpa-senco.com 26 Metal on brick. When using the attachment and a washer, the metal profile is still adjustable to make it vertical aligned. After that, fix the profile in the corners.

27. info@verpa-senco.com www.verpa-senco.com 27

28. info@verpa-senco.com www.verpa-senco.com 28 Plastic on concrete.

29. info@verpa-senco.com www.verpa-senco.com 29

30. info@verpa-senco.com www.verpa-senco.com 30 For all these you can of course also use a Pneumatic version.

31. info@verpa-senco.com www.verpa-senco.com 31 Nail not deep enough -Nail too long -DOD setting not correct (SGP40S/L) -Increase pressure (SAP40) Nail too deep -Nail too short -DOD setting not correct (SGP40S/L) -Reduce pressure (SAP40)

32. info@verpa-senco.com www.verpa-senco.com 32 Nail bends -Hard concrete / big pebble stones -Steel reinforcement direct under surface -Hard surface (steel) Nail not deep enough in steel -Steel too hard

33. info@verpa-senco.com www.verpa-senco.com 33 Nail wont stay in material -Base material not thick enough (> 5mm) Nail breaks -Base material too hard -Nail too long

34. info@verpa-senco.com www.verpa-senco.com 34 QFit the Senco pins in other tools AYes, they fit (except for Hilti or unknown brands) QFit Senco gas in other tools AYes, it fits (PC1254 is universal), gas fuel is lubricant and gives no negative result (even more shots are possible) QWhich nail to be used for which application AUse the table (advice, always test on site) QWhat service needs to be done on the tools? ATool needs to be proper managed, and needs cleaning (interval depending on use)