1. KV 750 and KV 960
Trolley special made for the specific models. Comes ”ready-to-go” in the box.
All fittings are made so the power cutter can be mounted without any alterations or adapters. Track control for curve cutting. Depth control with scale to make it easy to go back to the correct depth.

2. KV 750 vs FW 20

3. FW KV 750

4. FW Throttle Handle KV 750
You can’t keep control of the trolley as you will have to push the safety clutch.
Full control as the throttle handle only covers half the handlebar.

5. FW 20 Height Adjustment KV 750
Large, easy to manoeuvre handle, with depth scale to be able to return to previous depth.
Small and complicated handling of the height. No scale to show the cutting depth.

6. FW 20 Mounting the Cutter KV 750
Two steps;
1. Mount the rear handle with integrated throttle
2. Mount the front handle
Three steps;
1. mount the rear grip
2. Mount the throttle
3. Mount the front

7. FW 20 Alignment KV 750 No fine tuning of the power cutter’s alignment
Track Control for optimum alignment

8. FW 20 Wheel adjustment KV 750 No adjustment of the wheels
Full adjustment in both directions

9. FW Weight KV 750
32,0 kg
70 lb
24,5 kg
50 lb
25% lighter!