1. KEUR INDUSTRIES, INC. HOW TO LAY OUT A LABORATORY 2/15/2019

2. KEUR INDUSTRIES, INC. GENERAL DESIGN INFORMATION
WALL TABLES DEPTH= 24” OR 30”
CENTER TABLE DEPTH= 48”, 54” OR 60”
AISLE SPACE= NO LESS THAN 48”
TABLE HEIGHTS= 31” OR 37”
2/15/2019
Keur Industries, Inc.

3. KEUR INDUSTRIES, INC. GENERAL DESIGN INFORMATION
SERVICES SUCH AS FUME HOODS, SINKS OR SAFETY EQUIPMENT MUST BE CENTRALLY LOCATED
FUME HOOD LOCATED IN AREAS SO NOT TO INTERFERE WITH EXITS OR THE HEATING/VENTILATING SERVICE
2/15/2019
Keur Industries, Inc.

4. KEUR INDUSTRIES, INC.
A LABORATORY PLAN SHOULD ACCOUNT FOR WORK FLOW AND SAFETY
2/15/2019
Keur Industries, Inc.

5. KEUR INDUSTRIES, INC.
SKETCH OUT ON PAPER THE ROOM AREA SHOWING ANY IRREGULARITIES SUCH AS PIPES, COLUMNS, ETC.
2/15/2019
Keur Industries, Inc.

6. KEUR INDUSTRIES, INC.
MEASURE AREA TO BE USED. INCLUDE ALL WALL TO WALL, WALL TO DOOR, ETC.
2/15/2019
Keur Industries, Inc.

7. KEUR INDUSTRIES, INC. SELECT THE SIZE OF CABINETS FOR THE LABORTORY
DECIDE IF THE COUNTER WILL BE 24” DEEP OR 30” DEEP
2/15/2019
Keur Industries, Inc.

8. KEUR INDUSTRIES, INC.
IF WALL CABINETS ARE REQUIRED, ADD THIS TO THE LAYOUT
HAVE THEM THE SAME WIDTH AS THE BASE CABINETS IF POSSIBLE
2/15/2019
Keur Industries, Inc.

9. KEUR INDUSTRIES, INC.
IF A FUME HOOD IS REQUIRED, LOCATE IT AWAY FROM MAJOR TRAFFIC AREAS SUCH AS DOORS AND VENTILATING SYSTEMS
2/15/2019
Keur Industries, Inc.

10. KEUR INDUSTRIES, INC.
USE OUR CATALOG TO DECIDE WHICH CABINETS TO USE AND THEIR LOCATION
SHOW LOCATION AND LABLE EACH OF THE SINKS AND SERVICE FIXTURES
2/15/2019
Keur Industries, Inc.

11. KEUR INDUSTRIES, INC.
SELECT THE COUNTER TOP MATERIAL BEST SUITED FOR THE LABORATORY APPLICATION
DIFFERENT TOPS CAN BE USED IN THE SAME LABORATORY FOR DIFFERENT AREAS SUCH AS A DESK VERSUS A WORK AREA
2/15/2019
Keur Industries, Inc.

12. KEUR INDUSTRIES, INC.
LIST SEPARATELY ANY OTHER ITEMS THAT SHOULD BE INCLUDED IN QUOTE SUCH AS:
NON-MECHANICAL INSTALLATION
OTHER EQUIPMENT (STOOLS, PEGBOARDS, SAFETY EQUIPMENT, ETC.
2/15/2019
Keur Industries, Inc.

13. KEUR INDUSTRIES, INC.
We will analyze the layout and provide a CAD drawing along with pricing based on the design
2/15/2019
Keur Industries, Inc.

14. KEUR INDUSTRIES, INC.
2/15/2019
Keur Industries, Inc.