1. Int’l Manufactured Stone Corp.
GREAT-STONE
Int’l Manufactured Stone Corp.

2. 歡迎 Welcome ようこそ Bienvenido Willkommen Benvenuto Boa vinda Добро пожаловать ) Bienvenue 환영

3. About us

4. Factory

9. Features of GREAT-STONE ?

10. Light Weight
Easy Installation
Practicality
Variety
Economy
Primitive
Environment Protection
Nature
Durability

11. GREAT-STONE Products

12. GS Series GSB Series Pavers Accessory

13. GS Series

14. Ledge Stone

15. GS-022
GS-038
GS GS GS GS-004

23. Castle Stone

24. GS GS GS GS GS-039

33. Country Ledge Stone

34. GS GS GS GS-037

39. Field Stone River Rock
GS-024
GS-025
GS GS GS-018

45. Rustic Lime Stone

46. GS-006S
GS-005
GS-006

54. GSB Series

55. GSB-001
GSB-102
GSB-103
GSB-105
GSB-106
GSB-107

60. Pavers

61. GSP-001
GSP-002

62. Wood Stone Mokume Stone
95x195x30 mm x195x30mm

63. WSP-002
WSP-005
WSP-001

64. WSP-101
WSP-102
WSP-S01
WSP-S05

65. WSP-001

70. Accessories

77. What’s new

78. Coral Stone

86. Artwork

88. COMING SOON~

89. Technical Datas

90. TECHNICAL DATA

91. Installation Instruction

92. To explain

93. A. Prepare the necessary tools. B
A. Prepare the necessary tools. B. Choose the surface for installation and prepare necessary weather resistance procedures. C. Spread the Great Stone out at the job site so you can review the final appearance. D. Check the rear surface of the pieces for cleaning ness. Brush the surface to clean if required. E. Use circular or table saw for trimming. F. Hatchet can also be used if preferred. G. Use mortar mixer to mix dedicated adhesive with water and apply to the working bed. H. Also apply to the backside of the stones. I. If corner pieces are required for your job, work on these first (Try to avoid cutting for corner pieces for completeness look) Notice that the corner pieces have a long and a short leg. Alternate these in opposite directions. J. Use trowel to scratch off excessive adhesive around the stone. K. Apply the same procedures to install flat veneer. L. After the worked area is completed, use grout bag to fill in the dedicated adhesive to all the joints. Care must be taken to avoid smearing of mortar on the surface of the stone. M. When the mortar joints are thumb print dry, use a wood stick or metal joining tool to point up the joints. N. Rack out excess mortar, compact and seal edges around the stones before the mortar joints have become firm. O. Use soft brush to tidy the stone surface. P. Job completed.

94. Wrong Procedure & Defective product (From : other brands)

95. POINT
From : other brands’

96. From : other brands’
POINT

97. From : other brands’
POINT

98. POINT
From : other brands’

99. POINT
From : other brands’

100. Export

102. Samples & Package

103. TO SEE
A MARK / LOGO
IS TO SEE US

104. CONTACT US Website http://www.great-stone.com E-Mail
New Photo Gallery

105. Copyright © 2006 GREAT-STONE. All Rights Reserved
END
Copyright © 2006 GREAT-STONE. All Rights Reserved