1. Brandywine Communications 2018 Sales Meeting Cody WY May 15/16 2018
Introducing the M212
Brandywine Communications 2018 Sales Meeting
Cody WY May 15/

2. What is the M212? The M212 is a new modular master clock system
It is intended as the replacement for the M210 and M211 series
It is derived from the Modular Master Clock system
It is still not ready for sale but will be announced in the next 30 days

3. Why build another Modular System?
The MMC is a high end product and costly to produce
The M212 is essentially a cost reduced version for commercial markets
Feature set is designed to compete with SecureSync S650 at lower cost
Some features may make their way back into the MMC

4. Key features
1U chassis
LCD display and keypad for IP address setup and basic status
Single Master Clock Module
6 output slots
Single Power Supply

5. View1

6. View 2

7. View 3
Front View
Rear View

8. Key “Non-features”
We do not want to cannibalize MMC sales, so certain features will never be available on the M212
No redundancy
No dual power
No dual MCM
No Hot Swap
Spoofing detection
High Performance Rubidium

9. User Interface 40x 2 front panel LCD with 5 way keypad
Basic status
IP address setup (needed to talk via web page)
Secure Web Browser
https// is new baseline requirement for most government systems
Simple Network Management Protocol
SNMP v1,2c, 3

10. Synchronizing Inputs Multi – GNSS receiver SAASM/M-Code GPS* IRIG B
GPS, GLONASS, Beidou & Galileo ready
US Government users can use GPS only
Other constellations always include GPS
SAASM/M-Code GPS*
IRIG B
Have Quick/1PPS
RS232/422 (via OSM)
Optical link from another M212 ( via OSM) *
* Planned

11. Available Oscillators
Baseline Oscillator
Temperature Compensated Crystal Oscillator (TCXO) –
Holdover is ~1ms/day depending on temperature
Optional Oscillators
Oven Controlled Crystal Oscillator (OCXO)
Holdover is ~25µs/day depending on temperature
Rubidium Oscillator (Rb)
Holdover is ~10µs/day depending on temperature

12. Output Modules Output Module types “Intelligent” “Distribution”
Similar to MMC, configurable and with individual output alarms
“Distribution”
Signal is generated on MCM and the OSM provides multiple buffered outputs
No output alarms

13. Universal O/P
4 outputs
Outputs are programmed per connector from the list of outputs
BNC or 3 pin connector may be used
IRIG Codes
Other timing signals
IRIG A (2 variants)
Have Quick
IRIG B (9 variants)
BCD (2 variants)
IRIG G (2 variants)
XR3
IRIG H (1 variant)
2137
1PPS
1PPM

14. NTP Module Carryover from MMC 2 port 100BaseT Supports NTP V3, V4
Supports encryption and authentication

15. Octal Serial Port “Distribution Module” 8 serial ports
All ports have the same message generated on MCM
Ports can be link set for RS232 or RS422/485
One port can be configured as a sync input to the M212

16. Distribution Modules Planned
5 MHz
10 MHz
1PPS
IRIG B
Have Quick/IRIG B DCLS

17. Intelligent Modules Planned(1)
PTP Grand Master /Slave
4 port Module
10 GbE - 1 ea.
1 GbE -3 ea.
1 port will be configurable as a reference input
Status:
Basic hardware engine to power this is due in next 30 days
Customer hardware available this year

18. Intelligent Modules Planned(2)
E1/T1 Module
Basic development has been done for HPTS
12 outputs
nX8kHz Module

19. Pricing and competition
Final Pricing has not been set – the numbers below are budgetary
M212
1U MMC
Spectracom Secure Sync
Base Unit (Chassis, PSU, TCXO MCM,GPS, antenna)
3390
8945
3400
Add OCXO
500
std
IRIG B in/out
750
1PPS in/out
495
3 GbE ports
1400
planned
1500
Universal card
1095
1135
Not available