1. There are pitchers of ice water and lemonade on a picnic table
There are pitchers of ice water and lemonade on a picnic table. How do you know which liquid is in each pitcher? It’s easy! Lemonade is yellow and has a tart taste that is hard to miss. A yellow color and a tart taste are two properties of lemonade.

2. Examples of Physical Properties
What are some examples of physical properties?
A physical property is any characteristic of a material that can be observed or measured without changing the composition of the substances in the material.
Viscosity, conductivity, malleability, hardness, melting point, boiling point, and density are examples of physical properties.

3. Examples of Physical Properties
Viscosity
The tendency of a liquid to keep from flowing is called its viscosity.
Thick liquids, such as corn syrup and honey, have a high viscosity.
Thin liquids, such as vinegar and water, have a low viscosity.

4. Examples of Physical Properties
Conductivity
A material’s ability to allow heat to flow is called conductivity.
Materials that have a high conductivity, such as metals, are called conductors.
Good conductors of heat are usually also good conductors of electricity.

5. Examples of Physical Properties
Malleability
The ability of a solid to be hammered without shattering is malleability.
Most metals, such as gold, are malleable.
An ice cube or piece of glass breaks into small pieces when struck with a hammer. Solids that shatter when struck are brittle, not malleable.

6. Examples of Physical Properties
Hardness
One material can scratch another material if it is harder than the other material.
A kitchen knife can scratch a copper sheet because stainless steel is harder than copper.
The material used to sharpen the knife blade must be harder than stainless steel. Diamond is the hardest known material.

7. Examples of Physical Properties
This Tlingit carver is using an adze to carve a canoe from Western red cedar. Red cedar is a relatively soft wood. The adze is hard.

8. Examples of Physical Properties
Melting and Boiling Points
The temperature at which a material changes state is a physical property.
The temperature at which a substance changes from solid to liquid (melts) is its melting point.
The temperature at which a substance changes from liquid to gas (boils) is its boiling point.

9. Examples of Physical Properties
Melting and Boiling Points
Which of these substances are liquids at room temperature (20C, or 68F)?
Answer:

10. Examples of Physical Properties
Melting and Boiling Points
Which of these substances are liquids at room temperature (20C, or 68F)?
Answer: octane, water, and acetic acid

11. Examples of Physical Properties
Density
The ratio of the mass of a substance to its volume is its density.
Density can be used to test the purity of a substance.
Silver has a density of 10.5 g/cm3. A coin with a density of 9.9 g/cm3 is not made from silver, or it contains substances in addition to silver.

12. Using Physical Properties
How can knowing the physical properties of matter be useful?
Physical properties are used to identify a material, to choose a material for a specific purpose, or to separate the substances in a mixture.

13. Using Physical Properties
Using Properties to Identify Materials
A material can be identified by its properties.
Decide which properties to test.
Do tests on a sample of the unknown material.
Compare the results with the data reported for known materials.

14. Using Physical Properties
Using Properties to Choose Materials
Properties determine which materials are chosen for which uses.
For example, shoelaces must be flexible, that is they must be able to bend without breaking.
They must also be durable, that is, they must be able to withstand repeated use.

15. Using Physical Properties
Laces in hiking boots are usually made of nylon or leather, not from wood.

16. Using Properties to Separate Mixtures
What processes are used to separate mixtures?
Filtration and distillation are two common separation methods.

17. Using Properties to Separate Mixtures
Filtration
You can separate hot tea from loose tea leaves by pouring the mixture through a strainer. Filtration is a process that separates materials based on the size of their particles.

18. Using Properties to Separate Mixtures
These students filter (sift) dirt through a wire screen to locate small objects. Particles of dirt are small enough to pass through the holes, but objects such as broken bits of pottery are too large.

19. Using Properties to Separate Mixtures
Distillation
Sometimes all the particles in a solution are small enough to pass through a filter. Distillation is a process that separates the substances in a solution based on their boiling points.

20. Recognizing Physical Changes
The change of water from a liquid to a gas during boiling is a physical change. A physical change occurs when some of the properties of a material change, but the substances in the material remain the same.

21. Recognizing Physical Changes
During a physical change, the size and shape of a material can change but not the composition. Some examples include
melting butter in a pan
crumpling a piece of paper
slicing a tomato

22. Recognizing Physical Changes
Some but not all physical changes can be reversed. Braiding hair is a reversible change. Cutting hair cannot be reversed.

23. Which of the following is not a physical property?
Assessment Questions
Which of the following is not a physical property?
density
boiling point
flammability
conductivity

24. Which of the following is not a physical property?
Assessment Questions
Which of the following is not a physical property?
density
boiling point
flammability
conductivity ANS: C

25. Which of these materials is not malleable?
Assessment Questions
Which of these materials is not malleable?
copper
aluminum
glass
gold

26. Which of these materials is not malleable?
Assessment Questions
Which of these materials is not malleable?
copper
aluminum
glass
gold ANS: C

27. Assessment Questions
In choosing a material for use as a wire to carry electric current, which physical property would be most important?
conductivity
malleability
hardness
boiling point

28. Assessment Questions
In choosing a material for use as a wire to carry electric current, which physical property would be most important?
conductivity
malleability
hardness
boiling point ANS: A

29. Assessment Questions
Which of these statements best describes a physical change in a pure substance?
The substance changes into one or more new substances.
Some of the properties of the substance change, but the material remains the same.
The properties of the material do not change, and the material remains the same.
The substance is separated into two or more simpler substances.

30. Assessment Questions
Which of these statements best describes a physical change in a pure substance?
The substance changes into one or more new substances.
Some of the properties of the substance change, but the material remains the same.
The properties of the material do not change, and the material remains the same.
The substance is separated into two or more simpler substances. ANS: B

31. Assessment Questions
The process of filtration uses the difference in boiling points of substances to separate a mixture. True False

32. Assessment Questions
The process of filtration uses the difference in boiling points of substances to separate a mixture. True False
ANS: F, distillation