1. TrueSTEAM™ Humidification System
Click For Next Slide
To advance this module, click when this icon appears on the slide.

2. What you will learn Overview of TrueSTEAM™
The Truth About Evaporative vs Steam Humidifiers
TrueSTEAM Key Features and Benefits
Application and Installation Overview
TrueSTEAM Support Materials
Click For Next Slide

3. TrueSTEAM™ Humidification System Overview
Click For Next Slide

4. True Innovation for Humidification
TrueSTEAM™ Overview
Combines the benefits of steam with the reliability and easy install of bypass.
Increases overall available market by more than 30% due to install flexibility.
Finally, a solution for unconditioned spaces.
Simple maintenance.
True Innovation for Humidification
Click For Next Slide

5. True Innovation for Humidification
TrueSTEAM™ Overview
Quantum Leap in Application and Performance.
Eliminates dealers’ #1 callback – can’t reach set-point!
Installs faster than bypass – can be mounted in under 5 minutes!
Can be installed remotely – up to 20 feet from HVAC equipment with remote mount hose.
More control options for every user.
1:1 Humidification Delivery Rate (all water into air).
Reg
Click For Next Slide
True Innovation for Humidification

6. The Truth About Humidification Delivery
Many humidifier manufacturers list output capacity in gallons per day (GPD), or the amount of moisture they can deliver in a 24-hour period while the furnace is running (plenum temp 120F-140F).
But how do you know which ones really work and if a home is getting enough moisture?
Click For Next Slide
Comparing humidification delivery is a great place to start.

7. The Truth About Humidification Delivery
Typically, the GPD claim is based on a home’s heating equipment running 100% of the time, for 24 hours a day at 120˚F.
Since evaporative humidifiers are delivering 100% of this humidity output only when the furnace is running (and no furnace runs full-time), they rarely deliver more than 1-gallon of humidified air for every FOUR gallons they use.
In other words, for every 1 gallon humidified, 3 gallons are being wasted down the drain!
Click For Next Slide

8. The Truth About Humidification Delivery
Added to this are portable humidifiers that only humidify in the room which they are located, not the whole house. They also need to be constantly re-filled with water, which can be a hassle.
TrueSTEAM™ offers the most reliable, efficient levels of moisture because of its near 1:1 humidification delivery rate, regardless of equipment operation.
Click For Next Slide

9. The Truth About Evaporative
Another factor limiting today’s evaporative humidifier is that HVAC equipment is changing.
Dealers are selling more:
High efficiency % furnaces
Heat pumps
Variable speed
Equipment changes negatively impact evaporative humidifier performance.
Plenum Temps
Airflow + =
GPD OUTPUT
Click For Next Slide

10. The Truth About Evaporative
Because equipment is running less and at lower temperatures, a capacity rating of 18 GPD on the box is closer to 6 GPD actual output delivery.
Click For Next Slide

11. The Truth About Evaporative
Plus, for every gallon evaporated, up to 3 gallons is wasted down the drain, which can increase homeowner water bills and is not an eco-friendly option.
What does this mean over a 5-month heating season? See below…
Humidity
Water waste down drain
Per Day 4 12
Per Week 28 84 2
Per Month
112
336 8
Per 5 month Heating Season
560
1680 40
Click For Next Slide

12. So why are evaporative so popular?
Today’s evaporative humidifiers are flexible…
High familiarity with contractors. 30+ year old technology.
Have high reliability
Can be installed at a much lower cost than steam
Install quickly
…but bypass flow through humidifiers also experience issues
Reduced output due to equipment changes
Require large sections of available ducting and open space to install
Require the heat to be on in order to deliver humidity
Click For Next Slide
Reduced Output Leads to Callbacks

13. The Truth About Last-Generation Steam
GREAT PERFORMANCE
Today’s steam humidifiers offer great benefits…
More output
Humidity on demand – when you need it by activating equipment
Reduced water consumption
POOR RELIABILITY
Steam units have had reliability issues with sticking floats, burning heating elements and difficult maintenance
Can be difficult to install - leaves many opportunities on the table
Click For Next Slide

14. TrueSTEAM is True Innovation!
Water use
Inefficiency
Maintenance
Complexity
Time
Risk + =
Plus
Output
Efficiency
Flexibility
Ease No
Headaches!
Water use
Install Time
Complexity
Maintenance
Risk + =
Click For Next Slide
Quantum Leap in Application and Performance!

15. Revolutionizing Steam Humidification
The world of heating and cooling equipment is vastly different today than it was even a few years ago, with the trend towards high-efficiency, variable speed, dual-fuel and heat pump systems.
Because of how these systems operate, yesterday's humidifiers often fail to deliver the humidification that homeowners desire. You told us that you needed a humidification system that operated independently of equipment.
Click For Next Slide

16. Breakthrough Technology
TrueSTEAM™ takes the best features from current steam humidifiers with their efficiency, performance and decreased water consumption, and combines it with the ease of installation, reliability and value of flow-through humidifiers.
TrueSTEAM is different from others because it operates independent of equipment operation. And, with its near 1:1 humidification delivery rate, TrueSTEAM delivers the right amount of humidification to keep your customers satisfied.
Click For Next Slide

17. TrueSTEAM™ Features & Benefits
Non-Stick Heating Element – Made of Incoloy 600 – a non-stick material that inhibits material build-up.
Fail-Safe Water Sensing – Multiple sensors sit in a separate compartment to accurately monitor water levels.
Application Flexibility – Steam can be delivered up to 20 ft away from the humidifier accessing attics, crawl spaces, tight closets, etc.
Common-Sense Interface – LEDs indicate operating status and provide feedback for installation, maintenance, and troubleshooting.
Click For Next Slide

18. TrueSTEAM™ Features & Benefits
Mounts in Minutes – Requires only a 1 ¾” cut into ductwork and mounts on easy install bracket for accurate leveling.
Condensate Collect Dome & Beveled Nozzle – Prevents water from entering the ductwork, only evaporated steam enters the airflow.
Clean, Professional Installation – Push terminals for easy wiring and wires routed through interior harness for a clean look.
Easy Maintenance – No tools required to access and clean tank.
Click For Next Slide

19. Choice of Control Options
TrueSTEAM™ comes with a control option to fit virtually every application and budget.
Choose from the robust all-in-one control of the VisionPRO IAQ, the unique integrated control of the TrueIAQ Digital Control or the easy to use H8908 manual humidity control.
The next slide will go through the features of each control.
Click For Next Slide

20. Honeywell Humidifier Controls
All-in-one control
Easy 3-Wire Installation
Easy to install humidity control
Works with any whole-house humidifier
Calculates dew point
Prevents condensation from forming on windows
VisionPRO® IAQ, Total Home Comfort System
TrueIAQ® Digital IAQ Control
VisionPRO® IAQ but without the temperature control
Integrated auto-control of humidifiers, dehumidifiers,
ventilators, and/or bath fans
Digital interface with backlit display
Includes outdoor temp and humidity sensing
The H1008 humidity control provides additional comfort by automatically adjust the humidity level based on indoor temperature and humidity, as well as the measured or inferred outdoor temperature and the frost factor dial setting of the control itself.
The frost factor control maximizes RH levels in the home while allowing for variations in furnace size, window insulation and average daily climate temperature.
The H1008 requires an initial adjustment period of 2 days. After installation, the contractor should set the control to frost factor “5” and observe for either too much or too little humidity. If too much, the dial setting should be raised ‘1’. Down ‘1’ if too little.
Once the frost factor dial is at the desired setting, the H1008 takes over and makes further adjustments automatically as temperatures fluctuate.
H8908
The levels of humidification output in both the steam and evaporative Honeywell whole-house humidifiers are controlled by humidistat controls. These controls monitor the relative humidity and activate the humidifier accordingly.
The H8908 is a wall or duct-mounted humidistat for manually controlling low-voltage humidifiers or dehumidifiers. When initially installed, the contractor must choose a dial-setting based on the Relative Humidity/Outdoor Temperature scale on the humidity dial. To maximize humidity levels while minimizing excess condensation in the home, the dial should initially be at the Humidity Setting indicated for the applicable outdoor temperature listed on the control.
As outdoor temperature drops, the setting should be lowered 3% to accommodate for the effects of dewpoint, such as moisture or ice on windows. Dewpoint is the temperature at which air is saturated with water vapor. As air temperature cools beyond that point, water vapor condenses to liquid water. Inversely, increasing the setting 3% will raise the RH level accordingly.
It will generally take 24 hours for dewpoint effects to clear up. If the condition persists for longer than that, the humidistat should be set to the lowest setting to turn off the humidifier. Ventilating the home will also help remove excess moisture.
Controls to a percent of relative humidity based on outdoor temperature
Flexibility to set humidity based on outdoor conditions
Install on duct or in living space
H8908 Mechanical Humidity Controls
Click For Next Slide

21. True Innovation for Humidification
TrueSTEAM™ Summary
Combines the benefits of steam with reliability and easy install of bypass.
Increases overall available market by more than 30% due to install flexibility.
Finally, a solution for unconditioned spaces.
Eco-Friendly with 1:1 Humidification Rate – not flushing water down the drain.
Simple maintenance!
5-Year Warranty.
Click For Next Slide
True Innovation for Humidification

22. TrueSTEAM™
Installation Options
Click For Next Slide

23. Easy as 1, 2, 3, 4!
Click For Next Slide

24. Anywhere Installation!
Click For Next Slide

25. Remote Mounting Options
TrueSTEAM can be remotely mounted up to 20 feet away from the system with a remote-mount kit, making humidification possible in homes where it was once thought impossible.
Jeff
Click For Next Slide

26. Choose the size that is right for you…
6 Gallon Model (7 amp power)
+ Matches output capacity of large bypass and fan powered at 2000 sq ft
+ Reduces water consumption by 90% over bypass
+ Installs in 30% more applications than bypass/steam expanding market
+ First steam unit capable of being mounted on existing electrical circuits
9 Gallon Model (10 amp power)
+ Meets capacity requirement for homes 2500 sq ft
+ Step up opportunity for six gallon buyers
+ Presents opportunity to mount on existing electrical circuits where 20 Amp is code
12 Gallon Model (12 amp power)
+ Comparable to majority of steam devices on market today at gallon output
+ Value above existing steam devices in reliability, installation, easy maintenance
+ Mounting configuration expands market by 60% over current steam applications
(not available with H8908)
Click For Next Slide

27. TrueSTEAM Interactive Demos
Get more marketing, technical and install information and interactive demos online at
Use as a part of your overall training package with customers, sales and counter staff.
Click For Next Slide

28. TrueSTEAM™ Knowledge Test
(Session opened up by trainer- INSERT NAME HERE :>) )
Welcome everyone and thank you for taking the time to join us…..
Nancy Ramm is joining us to today to help us understand the new Brand Strategy and Visual Identity Standards.
Just so you know, another training module specifically for graphic designers is available. I you know someone who should receive that training, please send an to Nancy Ramm and she can add their name to the invitee list.
Click For Next Slide

29. TrueSTEAM™ Knowledge Test
Now that you completed this training module, take the short quiz to test your knowledge.

30. Test
1. The TrueSTEAM can run independent of the HVAC system to deliver humidification into the home. T F
2 .What is the TrueSTEAM’s Humidification Delivery Rate?
a. 1:4
b. 1:3
c. 1:1
3. What is the maximum length of remote hose that can be used with TrueSTEAM?
a. 10 Feet
b. 15 Feet
c. 20 Feet
d. 25 Feet
e. Up to 10-ft on the 6-gallon model, and up to 20-ft on the 9- and 12-gallon models.
4. When using a bypass humidifier, for every gallon evaporated, up to___ gallon(s) is wasted down the drain, which can increase homeowner water bills and is not an eco-friendly option.
a. 1
b. 3
c. 5
d. 0

31. Test
5. What size hole should be cut into the ductwork to mount the TrueSTEAM?
a. 1”
b. 1 ½”
c. 1 ¾”
d. 2”
6. What sizes does the TrueSTEAM come in?
a. 4, 6 and 8 Gallon
b. 6, 9 and 12 Gallon
c. 9, 10 and 12 Gallon
d. 6 Gallon Only

32. Test
7. The TrueSTEAM increases overall available market by more than ___ due to install flexibility.
a. 10%
b. 30%
c. 50%
d. 60%
8. What are the three controls that are bundled with the TrueSTEAM?
a. VisionPRO IAQ, TrueIAQ, H8908 Manual Humidistat
b. VisionPRO, TrueIAQ, H8909 Manual Humidistat
c. FocusPRO 6000, TrueIAQ, H8908 Manual Humidistat
d. Only the TrueIAQ

33. Test
9. The 9 Gallon TrueSTEAM meets capacity requirement for homes up to _____sq ft in size.
a. 1500
b. 2000
c. 2500
d. 3000
10. TrueSTEAM reduces water consumption by ___ over bypass.
a. 25%
b. 50%
c. 70%
d. 90%

34. Answer Key
1. T
2. C
3. E
4. B
5. C
6. B
7. C
8. A
9. C
10. D