1. DENON TU-604CI 6 zone expandable multi tuner
Ask if there are questions and refer to the support dide on www, escient Europe.com
Thank them for their time

2. DENON TU-604CI Key Features 6 independent tuner possibility
2 build in FM/AM Tuners
4 Expansion slots for Additional FM/AM or DAB tuners
Independent triggers + master trigger
Web interface for setup and remote assistance
Ip/RS232 control with easy to understand RS232 protocol

3. DENON TU-604CI Front panel Shift button Tuner on/off indicator Tuner
select
Tuning
buttons
Display
With
remote sensor
Memory
button
Display
Dimmer
Mode
button
RDS PT
PTY
buttons
Return/
Status
button
Power button +
Indicator
Tuner Module
on/off
selection
Function
buttons
Setup
button
Band mode
button
Jog dail/
Push to
select

4. DENON TU-604CI Back Panel Tuner module Independent Tuner module
Build in
FM/AM tuner
DAB/FM-AM
Tuner Expansion slots
RS232port
Ethernet port
Tuner module
Independent
Stereo line out
Remote
bus in/out
3.5mm jack
Tuner module
independent trigger 12v
Master trigger

5. DENON TU-604CI Tuner modules FM/AM TUNER module Specification;
Fm 87.5 – MHz
AM 522 – 1611 KHz
Sensitivity FM 1.0 uV
Sensitivity AM 18uV
s/n Stereo 70dB
F-type antenna connector
Presets and line connectivity are on the TU-604 Ci for each module slot

6. DENON TU-604CI Tuner modules DAB TUNER module Specification; BandIII
– MHz
Band L
– MHz
Sensitivity band III -98dB
Sensitivity band L -94 dB
s/n Stereo 90dB
F-type Antenna connector
Presets and line connectivity are on the TU-604 Ci for each module slot

7. DENON TU-604CI Tuner module installation Power off the unit
Un tighten the screws of the blind plates
Take away the blind plates which
cover the Tuner slots

8. DENON TU-604CI Tuner module installation Insert the tuner module
into the Slots
You can add DAB or
FM/AM modules in any slot
Fit the screws back to secure
the modules.
The modules are direct
recognized

9. DENON TU-604CI Web Interface The Web interface can be
accessed by entering the
provided IP address of the
router to the TU-604CI
In the Internet explorer
From here you have the ability
to select between;
- Unit control
- Setup menu
- Unit rename
Default is the name of the module Slot

10. DENON TU-604CI Unit Control Use this page to control: -Power (ON/OFF)
-Tuner (ON/OFF)
-Tuner Band (FM/AM or DAB
-Frequency
-Memory Preset
Select tuner (module)
Select preset and frequency
Display Select memory
Via select tuner you can select the module you want to control

11. DENON TU-604CI
Setup Menu
Assign Preset banks to
the Tuner modules

12. DENON TU-604CI Main Setup Select Tuner module to prepare for control.
(FM/AM module or DAB)
Tuner 1 and 2 are FM/AM build in

13. DENON TU-604CI Setup Menu Tuner Preset (A1 to G8) including:
- Memory Preset number
- Radio Band (FM/AM)
- Frequency

14. DENON TU-604CI Option Setup
Basic settings for the general control of the TU-604 CI:
- Dimmer Level
(Bright/Dim/Dark/OFF)
- Remote ID (1/2/3/4)
(set the remote code set for the
module)
- Remote Lock (ON/OFF)
(to avoid remote control)
Setup Lock (ON/OFF)
(lock the unit to avoid changes)
RS-232 Power (ON/OFF)
( Enables rs232 control from
standby mode)
- Firmware Update

15. DENON TU-604CI Unit rename Unit Rename Use this page to change the
name of Each tuner modules
in the unit.
This is a useful tool to identify
the tuner modules in a project

16. DENON TU-604CI Save & Load Save / Load
Use this pages to save your settings and to restore in case of accidental erasing.
You can also upload settings in another TU-604CI
Your projects are stored in your computer.

17. DENON TU-604CI 6 zone expandable multi tuner
RS232 control
Straight connection
Pin1: GND, Pin2: TxD, Pin3: RxD, Pin5: Common (GND)
Settings:
Communication Speed : 9600bps
Character Length : 8 bits
Parity Control : None
Start Bit : 1 bit
Stop Bit : 1 bit
Example:
STMS*ANFM<CR> : Select analog tuner FM band
TPS*ANUP<CR> : Select tuner preset one position up
TMS*ANMANUAL<CR> : Tuning frequency manual mode.
The complete RS232 protocol files are downloadable on the Denon web site:
TU-604CI 