1. Introduction to: -2D -2.5D - Pro
a suite of interactive modeling solutions for seismic survey planning and interpretation
-2D -2.5D - Pro

2. What you can do with the package
With Full-wave modeling you can model the gathers and time sections for explosive and surface sources with custom wavelet for:
Rough topography, various near-surface conditions, surface_waves, refractions, etc.
Thin-layered models that are build on the basis of well-log data.
Complex anisotropy: transversally isotropic media and fracturing systems.
Porous fluid-saturated media (Gasman approximation).
Also, basing on Full-wave modeling may be done:
AVO analysis for anisotropic, porous, fluid-saturated, viscoelastic, thin-layered media.
Q-factor estimation for thin-layered media by VSP and well-log data.
Processing: post-stack, pre-stack depth and time migrations for surface and VSP data.
Building velocity model by seismic data
The package also allows producing and studying:
time field of incident waves
AVO curve
Synthetic shotgather and wavefield snapshots
Seismic images from synthetic and real data

3. Interactions with the package
Model building
Arrival time
& Energy fields
Resulting
seismic images
Synthetic
shotgathers
Wavefield
snapshots
Velocity by
seismic data

4. Tracing waves: “Salt dome cornice model”

5. ●Modelbuilder Modelbuilding using raster image
Creation of thin-layered model by well-logs (LAS files
Modelbuilding using raster image
Modelbuilding using data in grid formats

6. Modeling Engine & Vizualizer

7. What wavelets are used?
Approximation of user custom wavelet with Rikker wavelet
Approximation of user custom wavelet with Puzirov wavelet

8. Modeling for development of advanced processing procedures1 2 3 4 5 6 7 8 9 10
0.8
1.2
1.6
2.0
2.4
2.8
0.4
-500
500
1000
1500
2000
2500
3000
3500
4500
4000
5000
5500 G1 G XV X SK RK
(P1S1)
(P1P1)
(P1P2)
(P1S2) Zv
Synthetic shotgather, which demonstrates duplex waves
originated on vertical layer 80 m thickness (previous slide),
at coordinate X=4000m. Legend:
1 – reflections from base boundary;
2 – compressional duplex wave, reflected from nearest to the source side of a vertical layer;
3 – compressional duplex wave, reflected from a far side of a vertical layer;
4 – converted duplex wave, reflected from nearest to the source side of a vertical layer;
5 – converted duplex wave, reflected from a far side of a vertical layer;
6 – converted duplex wave, transmitted through the vertical layer;
7 – compressional duplex wave, transmitted through the vertical layer;
8 and 9 - reflected duplex waves, originated from PS-wave, which changed mode on a base boundary;
10 – transmitted duplex wave, originated on top of a vertical layer as result of incidence on it of direct compressional wave.
Scheme of origin of reflected and transmitted waves on thin vertical layer

9. Effect of LVZ surface waves and uneven surface on CDP data imaging
Synthetic time cross-section. The receiver grouping base 150 m
With ellipse are shown zones of seismic image distortions caused by LVZ conditions, which erroneously could be interpreted on real data.

10. Pre-stack Kirchhoff migration
Seismic imaging for post-stack interpetation
CMP stack
Initial model
Pre-stack Kirchhoff migration
(depth scale)

11. “MARMOUSI” SEGY-Model
Modeling of complexly built medium
“MARMOUSI” SEGY-Model
with ellipse is shown target “gas deposit”
Maximum Energy (E)

12. Imaging without anisotropy
Modeling of TTI-anisotropy and fracturing
Depth pre-stack migration (VWKM) taking anisotropy into account
for the best possible case scenario – exact velocity model and data.
Imaging without anisotropy

13. AVO-modeling in conditions of thin-layered, anisotropic, fractured, viscous-elastic media
1 - Vp=2177 m/s
Vs=888 m/s
ρ =2160 kg/m3
2 - Vp=1967 m/s
Vs=1312 m/s
ρ =2050 kg/m3
3 - Vp=2131 m/s
Vs=869 m/s
ρ =2100 kg/m3
4 - Vp=2177 m/s а b
MODEL
Transmitted wave
Receivers
Z-comp.
Reflected wave c d α°
K=K(α)
X-comp.
AVO-dependency
Modeling of AVO-effect for the flat target reflecting boundary with homogeneous upper thickness.
Legend: a -model; b, d – shotgather for Z- and X-component;
c - AVO-dependency graph.

14. Why you need Full-wave modeling in seismic …
4+ Product stable applications
3+ Product stable progress
2 Product multiple successes
6 Reborn Product stable applications
1 Product first successes
Revenues
5 Reborn Product multiple successes & progress
3- Product numerous failures
0 Product initial development
4- Product Oblivion
Time
Product/Site Typical Development & Revenues time curve
+ via modeling and testing; - via trial-and-error method

15. Tesseral-Pro : Modeling solutions for 2D & 3D seismic surveys
Improved thin-layer 3D model building …
“Tesseral Pro” provides improved thin-layer model building on the base of collected well log information, utilizes complex well information including well logs, their interpretation, strata boundaries, well coordinates and inclinometer data about the well geometry. “Tesseral Pro” can be used for graphical document design compound from sections, surfaces, 3D plots, seismograms and seismic sections, text fields, pictures, etc.

16. Tesseral-Pro : Modeling solutions for 2D & 3D seismic surveys
Ray-tracing as interpretational tool
3-D visualization of seismic files, wells and horizons.
2-D, 2.5-D and 3-D gathers, depth migrated cubes and sections, velocity cubes can be shown either by traces or more sophistically by their vertical sections, horizontal section and sections along a horizon map
Time field based 2-D anisotropic ray tracing modeling in addition to the finite-difference modeling methods. One time reflected waves ray tracing supports both compressed and converted waves on the base of time fields.

17. Summary www.tesseral-geo.com
Full-wave modeling is a tool for improving the quality and reliability of the interpretation of seismic surveys. It is particularly helpful for planning acquisition parameters, fine-tuning of the processing sequence...
Full-wave modeling may be especially helpful for interpreters working with seismic record dynamics, i.e. AVO analysis, multi-component acquisition (polarized seismic prospecting) ...
Full-wave modeling allows consistently analyze characteristics of seismic records for complexly structured geological media including: thin- and sub-vertical layering, abrupt velocity changes in all directions, anisotropy and fracturing systems…
Tesseral is easy to use visual learning tool. It can help geoscientists in developing and testing seismic processing procedures and sequences, to better understand wave phenomena in geological media and the specifics of the seismic exploration methods, and to present results in visual and consistent form for decision-making…